Difference between revisions of "Voltcraft PPS-11815/Info"
Jump to navigation
Jump to search
(Created page.) |
Uwe Hermann (talk | contribs) m |
||
| Line 3: | Line 3: | ||
<small> | <small> | ||
$ '''lsusb -v''' | $ '''lsusb -v''' | ||
Bus 004 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light | Bus 004 Device 002: ID ''' 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light''' | ||
Device Descriptor: | Device Descriptor: | ||
bLength 18 | bLength 18 | ||
| Line 12: | Line 12: | ||
bDeviceProtocol 0 | bDeviceProtocol 0 | ||
bMaxPacketSize0 64 | bMaxPacketSize0 64 | ||
idVendor 0x10c4 Cygnal Integrated Products, Inc. | idVendor 0x10c4 '''Cygnal Integrated Products, Inc.''' | ||
idProduct 0xea60 CP210x UART Bridge / myAVR mySmartUSB light | idProduct 0xea60 '''CP210x UART Bridge / myAVR mySmartUSB light''' | ||
bcdDevice 1.00 | bcdDevice 1.00 | ||
iManufacturer 1 Silicon Labs | iManufacturer 1 '''Silicon Labs''' | ||
iProduct 2 CP2102 USB to UART Bridge Controller | iProduct 2 '''CP2102 USB to UART Bridge Controller''' | ||
iSerial 3 0001 | iSerial 3 '''0001''' | ||
bNumConfigurations 1 | bNumConfigurations 1 | ||
Configuration Descriptor: | Configuration Descriptor: | ||
| Line 38: | Line 38: | ||
bInterfaceSubClass 0 | bInterfaceSubClass 0 | ||
bInterfaceProtocol 0 | bInterfaceProtocol 0 | ||
iInterface 2 CP2102 USB to UART Bridge Controller | iInterface 2 '''CP2102 USB to UART Bridge Controller''' | ||
Endpoint Descriptor: | Endpoint Descriptor: | ||
bLength 7 | bLength 7 | ||
Latest revision as of 18:07, 6 September 2014
lsusb
$ lsusb -v
Bus 004 Device 002: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x10c4 Cygnal Integrated Products, Inc.
idProduct 0xea60 CP210x UART Bridge / myAVR mySmartUSB light
bcdDevice 1.00
iManufacturer 1 Silicon Labs
iProduct 2 CP2102 USB to UART Bridge Controller
iSerial 3 0001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 2 CP2102 USB to UART Bridge Controller
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
The device obviously uses a standard CP2102 USB to serial converter. The interface seems to be identical to that used in Manson HCS-3202/Info, apart from a negligible difference in configuration.