Rigol DS1052E
Revision as of 18:33, 14 February 2015 by Uwe Hermann (talk | contribs)
 | |
| Status | supported |
|---|---|
| Source code | rigol-ds |
| Channels | 2 |
| Samplerate | 1GSa/s (1ch), 500MSa/s (2ch) |
| Samplerate (eq. time) | 10GSa/s |
| Analog bandwidth | 50MHz |
| Vertical resolution | 8bits |
| Triggers | edge, pulse width, slope, video, pattern, continuous time, alternate |
| Input impedance | 1MΩ‖15pF 300V RMS CAT I |
| Memory | 1Mpts (mode/ch-dependent) |
| Display | 5.7" QVGA (320x240), 64K colors |
| Connectivity | USB host/device, RS232, pass/fail out |
| Features | math: + / — / x / FFT, vertical sensitivity: 2mV/div - 10V/div |
| Website | rigolna.com |
The Rigol DS1052E is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope.
See Rigol DS1052E/Info for more details (such as lsusb -v output) about the device.
See Rigol DS1000 series for information common to all devices in this series.
Hardware
TODO.
Photos
Device, front
Protocol
The device uses USBTMC for communication with a host PC.
Resources
- EEVblog forums: The Rigol DS1052E
- DS1000E Programming Guide (link dead)
- Rigol Homebrew wiki (lots of useful info)