Difference between revisions of "Rigol DS1052E"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
Uwe Hermann (talk | contribs) m |
||
| Line 5: | Line 5: | ||
| source_code_dir = rigol-ds | | source_code_dir = rigol-ds | ||
| channels = 2 | | channels = 2 | ||
| samplerate = | | samplerate = 1GSa/s（1ch), 500MSa/s（2ch) | ||
| samplerate_equiv = | | samplerate_equiv = 10GSa/s | ||
| bandwidth = 50MHz | | bandwidth = 50MHz | ||
| vertical_resolution = 8bits | | vertical_resolution = 8bits | ||
| Line 18: | Line 18: | ||
}} | }} | ||
The '''Rigol DS1052E''' is a 50MHz, | The '''Rigol DS1052E''' is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope. | ||
See [[Rigol DS1052E/Info]] for more details (such as '''lsusb -v''' output) about the device. | See [[Rigol DS1052E/Info]] for more details (such as '''lsusb -v''' output) about the device. | ||
Revision as of 23:52, 2 January 2014
 | |
| Status | supported |
|---|---|
| Source code | rigol-ds |
| Channels | 2 |
| Samplerate | 1GSa/s（1ch), 500MSa/s（2ch) |
| Samplerate (eq. time) | 10GSa/s |
| Analog bandwidth | 50MHz |
| Vertical resolution | 8bits |
| Triggers | edge, pulse width, slope, video, pattern, continuous time, alternate |
| Input impedance | 1MΩ‖15pF 300 V RMS CAT I |
| Memory | 1Mpts (mode/ch-dependent) |
| Display | 5.7" QVGA (320x240), 64K colors |
| Connectivity | USB host/device, RS232, pass/fail out |
| Features | math: + / — / x / FFT, vertical sensitivity: 2 mV/div - 10V/div |
| Website | rigolna.com |
The Rigol DS1052E is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope.
See Rigol DS1052E/Info for more details (such as lsusb -v output) about the device.
Hardware
TODO.
Photos
Device, front
Protocol
The device uses USBTMC for communication with a host PC.
Resources
- EEVblog forums: The Rigol DS1052E
- DS1000E Programming Guide (link dead)
- Rigol Homebrew wiki (lots of useful info)