Difference between revisions of "Pico Technology PicoScope 2204A"

From sigrok
Jump to navigation Jump to search
(start of page)
m
Line 1: Line 1:
[[File:Picoscope 2204A.png|thumb|right|PicoScope 2204A.]]
[[File:Picoscope 2204A.png|thumb|right|PicoScope 2204A.]]


The [https://www.picotech.com/download/datasheets/picoscope-2000-series-data-sheet.pdf Pico Technology PicoScope 2204A] is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 10MHz.  
The [https://www.picotech.com/download/datasheets/picoscope-2000-series-data-sheet.pdf Pico Technology PicoScope 2204A] is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer and function generator).  


'''[[UP TO HERE]]'''
The oscilloscope supports a bandwidth of 10MHz. The max. sampling rate is 100 MS/s. The memory depth is 8 kS. The function generator/signal generator and arbitrary waveform generator/AWG has a bandwidth of 100 kHz.


The max. sampling rate (one-shot) is 100 MS/s (one channel mode) or 20 MS/s (two channel mode). The max. sampling rate for repetitive signals is 1 GS/s, the max. sampling rate in continuous streaming mode is 1 MS/s.
See [[Pico Technology PicoScope 2204A/Info]] for more details (such as '''lsusb -vvv''' output) about the device.


See [[Pico Technology PicoScope 2203/Info]] for more details (such as '''lsusb -vvv''' output) about the device.
'''[[UP TO HERE]]'''


== Hardware ==
== Hardware ==
Line 27: Line 27:
File:Picoscope 2203 pcb back.jpg|<small>PCB back</small>
File:Picoscope 2203 pcb back.jpg|<small>PCB back</small>
</gallery>
</gallery>
See also [http://www.flickr.com/photos/uwehermann/sets/72157625721726427/ this flickr set] for more PCB photos of the device.


== Protocol ==
== Protocol ==
Line 48: Line 46:
== Resources ==
== Resources ==


* [http://www.picotech.com/document/datasheets/PicoScope2200.pdf Datasheet]
* [https://www.picotech.com/download/datasheets/picoscope-2000-series-data-sheet.pdf Datasheet]
* [http://www.picotech.com/picoscope-oscilloscope-software.html Vendor software]
* [https://www.picotech.com/downloads Vendor software etc. download page]
* [https://www.picotech.com/download/manuals/picoscope-2000-series-a-api-programmers-guide.pdf Vendor oscilloscope programmer's guide]
* [https://www.picotech.com/download/manuals/TriggeringAPicoScopeSignalGeneratorUsingThePicoScopeAPIFunctions.pdf Vendor signal generator programmer's guide]


[[Category:Device]]
[[Category:Device]]
[[Category:Oscilloscope]]
[[Category:Oscilloscope]]
[[Category:Planned]]
[[Category:Planned]]

Revision as of 09:30, 4 January 2020

PicoScope 2204A.

The Pico Technology PicoScope 2204A is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer and function generator).

The oscilloscope supports a bandwidth of 10MHz. The max. sampling rate is 100 MS/s. The memory depth is 8 kS. The function generator/signal generator and arbitrary waveform generator/AWG has a bandwidth of 100 kHz.

See Pico Technology PicoScope 2204A/Info for more details (such as lsusb -vvv output) about the device.

UP TO HERE

Hardware

  • Xilinx Spartan XC3S250E
  • Cypress CY7C68013A-56PVXC
  • Analog Devices AD9288
  • Analog Devices AD8132
  • Meder Electronics SIL05-1A72-71D
  • Maxim MAX889S
  • HC4052

Photos

  • Front

  • Back

  • PCB front

  • PCB back

Protocol

Firmware

The usual Cypress FX2 firmware upload mechanism is used to upload a special FX2 firmware.

Start acquisition

Sample format

End acquisition

Triggers

Voltage ranges

Resources

Retrieved from "https://sigrok.org/w/index.php?title=Pico_Technology_PicoScope_2204A&oldid=14736"