Difference between revisions of "MASTECH M9803R"
Jump to navigation
Jump to search
| (2 intermediate revisions by 2 users not shown) | |||
| Line 7: | Line 7: | ||
| categories = CAT II (1000V) | | categories = CAT II (1000V) | ||
| connectivity = RS232 | | connectivity = RS232 | ||
| measurements = voltage, resistance, diode, capacitance, frequency, current | | measurements = voltage, resistance, diode, capacitance, frequency, current, hFE | ||
| features = hold, min/max, relative | | features = autorange, true-rms, data hold, delay hold, min/max, relative, bargraph, backlight | ||
| website = [http://web.archive.org/web/20100201191512/http://www.p-mastech.com/products/04_dm/m9803r.html p-mastech.com] | | website = [http://web.archive.org/web/20100201191512/http://www.p-mastech.com/products/04_dm/m9803r.html p-mastech.com] | ||
}} | }} | ||
The '''MASTECH M9803R''' is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity. | The '''MASTECH M9803R''' is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity. | ||
| Line 31: | Line 32: | ||
== Protocol == | == Protocol == | ||
The protocol is documented in: [http://www.mtoussaint.de/cdmm/doc/html/classM9803R.html cdmm: M9803R Class Reference] | |||
<pre> | |||
Detailed Description | |||
M9803R 11 byte binary protocoll. | |||
Reverse engeneered by Matthias Toussaint | |||
Port settings seem to be 9600 7E1 or 9600 7O1 (looks like a bug) | |||
Protocoll is 11 bytes binary fixed length | |||
END OF PACKET is 0x0d 0x0a | |||
Multimeter continuously sends data | |||
Byte 0: Sign ored together | |||
0x00 -> positive | |||
0x08 -> negative | |||
0x01 -> overflow | |||
Byte 1: Digit 4 binary | |||
Byte 2: Digit 3 binary | |||
Byte 3: Digit 2 binary | |||
Byte 4: Digit 1 binary | |||
Byte 5: Mode | |||
0x00 DCV | |||
0x01 ACV | |||
0x02 DCA | |||
0x03 ACA | |||
0x04 Ohms | |||
0x05 Ohms + Beep | |||
0x06 Diode V | |||
0x07 ADP | |||
0x08 DCA (10A) | |||
0x09 ACA (10A) | |||
0x0A Freq | |||
0x0C Capacity | |||
Byte 6:Decimal point position | |||
Display Unit Value | |||
Frequency | |||
0.000 kHz 0x00 | |||
00.00 kHz 0x01 | |||
00.00 Hz 0x05 | |||
000.0 Hz 0x06 | |||
Voltage | |||
000.0 mV 0x00 | |||
0.000 V 0x01 | |||
00.00 V 0x02 | |||
000.0 V 0x03 | |||
0000. V 0x04 | |||
Current | |||
0.000 mA 0x00 | |||
00.00 mA 0x01 | |||
000.0 mA 0x02 | |||
Capacity | |||
0.000 nF 0x00 | |||
00.00 nF 0x01 | |||
000.0 nF 0x02 | |||
0.000 uF 0x03 | |||
00.00 uF 0x04 | |||
Resistance | |||
000.0 Ohm 0x00 | |||
0.000 kOhm 0x01 | |||
00.00 kOhm 0x02 | |||
000.0 kOhm 0x03 | |||
0000. kOhm 0x04 | |||
00.00 MOhm 0x05 | |||
Byte 7: Hold/min/Max/Rel ored together | |||
0x01 Hold | |||
0x02 Rel | |||
0x04 Min | |||
0x08 Max | |||
Byte 8: Auto/Manu | |||
0x01 APOF (AutoPowerOff) | |||
0x02 Manu | |||
0x04 Auto | |||
0x08 MEM | |||
</pre> | |||
== Resources == | |||
* [http://www.pollin.de/shop/downloads/D830256B.PDF Manual] | |||
* [http://www.pollin.de/shop/downloads/D830256S.ZIP Vendor software] | |||
[[Category:Device]] | [[Category:Device]] | ||
[[Category:Multimeter]] | [[Category:Multimeter]] | ||
[[Category:Planned]] | [[Category:Planned]] | ||
Latest revision as of 15:25, 5 January 2020
 | |
| Status | planned |
|---|---|
| Counts | 4000 |
| IEC 61010-1 | CAT II (1000V) |
| Connectivity | RS232 |
| Measurements | voltage, resistance, diode, capacitance, frequency, current, hFE |
| Features | autorange, true-rms, data hold, delay hold, min/max, relative, bargraph, backlight |
| Website | p-mastech.com |
The MASTECH M9803R is a 4000 counts, CAT II (1000V) digital bench multimeter with RS232 connectivity.
Hardware
TODO.
Photos
Multimeter:
TODO.
RS232 cable:
TODO.
Protocol
The protocol is documented in: cdmm: M9803R Class Reference
Detailed Description
M9803R 11 byte binary protocoll.
Reverse engeneered by Matthias Toussaint
Port settings seem to be 9600 7E1 or 9600 7O1 (looks like a bug)
Protocoll is 11 bytes binary fixed length
END OF PACKET is 0x0d 0x0a
Multimeter continuously sends data
Byte 0: Sign ored together
0x00 -> positive
0x08 -> negative
0x01 -> overflow
Byte 1: Digit 4 binary
Byte 2: Digit 3 binary
Byte 3: Digit 2 binary
Byte 4: Digit 1 binary
Byte 5: Mode
0x00 DCV
0x01 ACV
0x02 DCA
0x03 ACA
0x04 Ohms
0x05 Ohms + Beep
0x06 Diode V
0x07 ADP
0x08 DCA (10A)
0x09 ACA (10A)
0x0A Freq
0x0C Capacity
Byte 6:Decimal point position
Display Unit Value
Frequency
0.000 kHz 0x00
00.00 kHz 0x01
00.00 Hz 0x05
000.0 Hz 0x06
Voltage
000.0 mV 0x00
0.000 V 0x01
00.00 V 0x02
000.0 V 0x03
0000. V 0x04
Current
0.000 mA 0x00
00.00 mA 0x01
000.0 mA 0x02
Capacity
0.000 nF 0x00
00.00 nF 0x01
000.0 nF 0x02
0.000 uF 0x03
00.00 uF 0x04
Resistance
000.0 Ohm 0x00
0.000 kOhm 0x01
00.00 kOhm 0x02
000.0 kOhm 0x03
0000. kOhm 0x04
00.00 MOhm 0x05
Byte 7: Hold/min/Max/Rel ored together
0x01 Hold
0x02 Rel
0x04 Min
0x08 Max
Byte 8: Auto/Manu
0x01 APOF (AutoPowerOff)
0x02 Manu
0x04 Auto
0x08 MEM