Difference between revisions of "ISO-TECH IDM103N"

From sigrok
Jump to: navigation, search
(add pictures)
(Supported.)
Line 2: Line 2:
 
| image          = [[File:Idm103n_01_front.png]]
 
| image          = [[File:Idm103n_01_front.png]]
 
| name            = ISO-TECH IDM103N
 
| name            = ISO-TECH IDM103N
| status          = planned
+
| status          = supported
 
| source_code_dir = serial-dmm
 
| source_code_dir = serial-dmm
 
| counts          = 4000
 
| counts          = 4000
Line 37: Line 37:
 
See [[Multimeter_ICs#Cyrustek ES51978]] for the DMM IC protocol.
 
See [[Multimeter_ICs#Cyrustek ES51978]] for the DMM IC protocol.
  
The transmission of the measurement data is disabled by default. The respective Cyrustek ES51978 pin (45, '''RS232''') is hooked to an IR phototransitor so an IR led has to be turned on in front of it to enable RS232 output. Pressing any button on any TV remote in front of it is enough to turn on the measurement transmission.
+
The transmission of the measurement data is disabled by default. The respective Cyrustek ES51978 pin (45, '''RS232''') is hooked to an IR phototransitor so an IR LED has to be turned on in front of it to enable RS232 output. Pressing any button on any TV remote in front of it is enough to turn on the measurement transmission.
  
 
== Resources ==
 
== Resources ==
  
TODO
+
* [http://www.yeint.lv/en/e-store/detail.php?SECTION_ID=643&ELEMENT_ID=13195 Photo of ISO-TECH IDM73 RS232 cable]
  
 
[[Category:Device]]
 
[[Category:Device]]
 
[[Category:Multimeter]]
 
[[Category:Multimeter]]
[[Category:Planned]]
+
[[Category:Supported]]

Revision as of 01:16, 7 October 2013

ISO-TECH IDM103N
Idm103n 01 front.png
Status supported
Source code serial-dmm
Counts 4000
IEC 61010-1 CAT II (1000V) / CAT III (600V)
Connectivity RS232
Measurements voltage, current, resistance, capacitance, frequency, rpm, diode, continuity
Features autorange, data hold, bargraph, backlight
Website iso-tech.com.cn

The ISO-TECH IDM103N is a 4000 counts, CAT II (1000V) / CAT III (600V) handheld digital multimeter with RS232 connectivity.

Hardware

Photos

Protocol

See Multimeter_ICs#Cyrustek ES51978 for the DMM IC protocol.

The transmission of the measurement data is disabled by default. The respective Cyrustek ES51978 pin (45, RS232) is hooked to an IR phototransitor so an IR LED has to be turned on in front of it to enable RS232 output. Pressing any button on any TV remote in front of it is enough to turn on the measurement transmission.

Resources