GW Instek GPD series
Revision as of 21:12, 9 March 2019 by Uwe Hermann (talk | contribs)
| Status | supported |
|---|---|
| Source code | gwinstek-gpd |
| Channels | 2/3/4 |
| Voltage/current (CH1) | 0-30V / 0-3A |
| Voltage/current (CH2) | 0-30V / 0-3A |
| Voltage/current (CH3) | various |
| Voltage/current (CH4) | various |
| Connectivity | USB/serial |
| Features | memory save/recall, key lock |
| Website | gwinstek.com |
The GW Instek GPD series are 2/3/4 channel programmable linear DC power supplies with USB/serial connectivity.
Devices
| Device | Channels | Voltage range | Current range | Power |
|---|---|---|---|---|
| GPD-2303S | 2 | 0-30 V, 0-30 V | 0-3 A, 0-3 A | 180 W |
| GPD-3303S | 3 | 0-30 V, 0-30 V, 2.5/3.3/5.0 V | 0-3 A, 0-3 A, 0-3 A | 195 W |
| GPD-4303S | 4 | 0-30 V, 0-30 V, 0-5 V or 5-10 V, 0-5 V | 0-3 A, 0-3 A, 0-3 A or 0-1 A, 0-1 A | 195 W |
| GPD-3303D | 3 | 0-30 V, 0-30 V, 2.5/3.3/5.0 V | 0-3 A, 0-3 A, 0-3 A | 195 W |
So far, only the GPD-2303S is supported and tested. Adding support for the other devices should be relatively easy for someone with hardware access, though. Patches welcome!
Protocol
See the vendor user manual for details.
Resources
- Specification (PDF)
- Downloads (datasheet, user manuals, drivers, vendor software)