Difference between revisions of "DreamSourceLab DSLogic U2Basic"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) |
Uwe Hermann (talk | contribs) |
||
| Line 20: | Line 20: | ||
== Hardware == | == Hardware == | ||
* '''FPGA''': Xilinx Spartan-6 XC6SLX9 | |||
* '''USB''': Cypress CY7C68013A (FX2) | |||
* '''I²C EEPROM''': ST 4128BRP | |||
* '''SDRAM''': Winbond W9864G6KH-6 | |||
* '''Crystal''': 24MHz | |||
== Photos == | == Photos == | ||
Revision as of 01:58, 16 April 2020
| Status | planned |
|---|---|
| Source code | dreamsourcelab-dslogic |
| Channels | 1-16 |
| Samplerate | Stream mode: 100MHz(3ch), 50MHz(6ch), 25MHz(12ch), 20MHz(16ch) |
| Website | dreamsourcelab.com |
The DreamSourceLab DSLogic U2Basic is a 16-channel USB-based logic analyzer, with sampling rates up to 400MHz (when using only 4 channels).
See DreamSourceLab DSLogic U2Basic/Info for more details (such as lsusb -v output) about the device.
Hardware
- FPGA: Xilinx Spartan-6 XC6SLX9
- USB: Cypress CY7C68013A (FX2)
- I²C EEPROM: ST 4128BRP
- SDRAM: Winbond W9864G6KH-6
- Crystal: 24MHz
Photos
Firmware
See DreamSourceLab DSLogic#Firmware.
Note: The FX2 firmware is loaded at powerup from the I²C EEPROM on the PCB.
EEPROM layout
The device has an I²C EEPROM with the following layout:
c2 0e 2a 29 00 00 00 04 XX XX XX XX XX XX .. ..
Description:
| Bytes | Description |
|---|---|
| 0 | 0xc2: FX2 "c2 load" mode, i.e. VID/PID/DID are loaded from EEPROM as the firmware. |
| 1-2 | 0x2a0e: USB vendor ID (VID before firmware renumerate). |
| 3-4 | 0x0029: USB product ID (PID before firmware renumerate). |
| 5-6 | 0x0000: USB device ID (DID before firmware renumerate). |
| 7 | 0x04: FX2 configuration byte (see FX2 TRM for details). |
| 8 - 6977 | Firmware (6970 bytes, sha1sum: 47975f295711cf0208bbd963bbfeaf5b36e87b8724cad1e67c0de1a86065b389) |
| Rest | Unknown, probably all-0xff. |