Braintechnology USB Interface V2.x

From sigrok
Revision as of 12:08, 28 July 2013 by Uwe Hermann (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Braintechnology USB Interface V2.x
Braintechnology usb interface v26.png
Status supported
Source code fx2lafw
Channels 8/16
Samplerate 24MHz
Samplerate (state)
Triggers none (SW-only)
Min/max voltage -0.5V — 5.25V
Threshold voltage Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V
Memory none
Compression none
Website braintechnology.de

The Braintechnology USB Interface V2.x is a Cypress FX2 eval board, which can be used as USB-based, 16-channel logic analyzer with up to 24MHz sampling rate.

There are various revisions of the hardware, e.g. V2.5, V2.6, and V2.7.

In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.

See Braintechnology USB Interface V2.x/Info for some more details (such as lsusb -vvv output) on the device.

Hardware

  • Main chip: Cypress CY7C68013A-56PVXC (FX2LP)
  • 64kB I2C EEPROM: Microchip 24LC641
  • Low-dropout voltage regulator: ST LD33
  • Crystal: 24MHz
  • ?: PDEI

Photos

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

Resources