Difference between revisions of "ARMFLY AX-Pro"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) (Updates) |
Uwe Hermann (talk | contribs) m |
||
| Line 3: | Line 3: | ||
The [http://www.armfly.com/product/AX-Pro/ax-pro.htm ARMFLY AX-Pro] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels. | The [http://www.armfly.com/product/AX-Pro/ax-pro.htm ARMFLY AX-Pro] is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels. | ||
It is a clone of the [[CWAV USBee AX]]. There is an "[http://item.taobao.com/item.htm?id=12503749579 RS232 RS485 RS422 CAN converter]" add-on board which also has a BNC connector for analog support. | It is a clone of the [[CWAV USBee AX-Pro]]. There is an "[http://item.taobao.com/item.htm?id=12503749579 RS232 RS485 RS422 CAN converter]" add-on board which also has a BNC connector for analog support. | ||
In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer. | In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer. | ||
Revision as of 19:55, 2 June 2012
The ARMFLY AX-Pro is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.
It is a clone of the CWAV USBee AX-Pro. There is an "RS232 RS485 RS422 CAN converter" add-on board which also has a BNC connector for analog support.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
See ARMFLY AX-Pro/Info for more detailed information on the device.
Hardware
- Main chip: Cypress CY7C68013A-56LTXC (56pin QFN package)
- I2C EEPROM: Atmel ATML920 24C02N SU27 D
- Low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3
- 24MHz crystal
- ...
Photos
AX-Pro
Cables
PCB, front
