Hameg HMO1524/Info
Revision as of 23:07, 22 November 2013 by Uwe Hermann (talk | contribs) (Uwe Hermann moved page Hameg HMO/Info to Hameg HMO1524/Info without leaving a redirect)
dmesg
$ dmesg [91100.145038] usb 4-1.8.3.1: new full-speed USB device number 50 using ehci-pci [91100.250515] ftdi_sio 4-1.8.3.1:1.0: FTDI USB Serial Device converter detected [91100.250550] usb 4-1.8.3.1: Detected FT232BM [91100.250553] usb 4-1.8.3.1: Number of endpoints 2 [91100.250555] usb 4-1.8.3.1: Endpoint 1 MaxPacketSize 64 [91100.250557] usb 4-1.8.3.1: Endpoint 2 MaxPacketSize 64 [91100.250559] usb 4-1.8.3.1: Setting MaxPacketSize 64 [91100.251017] usb 4-1.8.3.1: FTDI USB Serial Device converter now attached to ttyUSB0
lsusb
$ lsusb -v Bus 004 Device 050: ID 0403:ed72 Future Technology Devices International, Ltd HAMEG HO720 Serial Port Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0403 Future Technology Devices International, Ltd idProduct 0xed72 HAMEG HO720 Serial Port bcdDevice 4.00 iManufacturer 1 iProduct 2 iSerial 3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 2 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0