Protocol decoder:dcf77
 | |
| Name | DCF77 time protocol |
|---|---|
| Description | European longwave time signal (77.5kHz carrier signal) |
| Status | supported |
| License | GPLv2+ |
| Source code | decoders/dcf77 |
| Input | logic |
| Output | dcf77 |
| Probes | DATA |
| Optional probes | PON |
| Options | — |
The dcf77 protocol decoder supports the DCF77 european longwave time signal (77.5kHz carrier signal).
Hardware
TODO.
DCF77 on the Pollin DCF1 module
The dcf77/pollin_dcf1_module directory in sigrok-dumps contains a set of example captures of a DCF77 signal. The hardware used for receiving the signal is a Pollin DCF1 module (3.3V supply). The Pollin order number for the module is 810 054.
The dumps were made January 9, 2012 in the evening/night. Only the dcf77_480s_pon_interrupted.sr dump was made January 10, 2012 in the evening.
The logic analyzer used was a Saleae Logic (at 1MHz).
Probe setup:
| Probe | DCF1 module |
|---|---|
| 1 (black) | PON |
| 2 (brown) | DATA |
Photos:
Protocol
TODO: Detailed protocol description.
Resources
TODO.