OpenBSD

This page describes how to build/install sigrok on OpenBSD.

The instructions were tested on OpenBSD 5.2, older versions may or may not have the required libs/versions to build sigrok.

Distribution packages

There are no OpenBSD packages/ports yet, contributors welcome!

Building

libsigrok

Requirements:

• git
• gcc (>= 4.0)
• autoconf >= 2.63
• automake >= 1.11
• libtool
• pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
• libglib >= 2.28.0
• libusb-1.0 (this is an integral part of OpenBSD, not an extra package/library, apparently)
• libzip >= 0.8
• libftdi >= 0.16 (for some logic analyzer hardware)

Installing the requirements:

$ pkg_add -r git autoconf automake libtool glib2 libzip libftdi

Building:

$ git clone git://sigrok.org/libsigrok
$ cd libsigrok
$ AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 ./autogen.sh
$ ./configure
$ make
$ make install

libsigrokdecode

Requirements:

• git
• gcc (>= 4.0)
• autoconf >= 2.63
• automake >= 1.11
• libtool
• pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
• libglib >= 2.24.0
• Python >= 3.0

Installing the requirements:

$ pkg_add -r git autoconf automake libtool glib2 python

Building:

$ git clone git://sigrok.org/libsigrokdecode
$ cd libsigrokdecode
$ AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 ./autogen.sh
$ ./configure
$ make
$ make install

sigrok-cli

Requirements:

• git
• gcc (>= 4.0)
• autoconf >= 2.63
• automake >= 1.11
• libtool
• pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
• libglib >= 2.28.0
• libsigrok >= 0.2.0
• libsigrokdecode >= 0.1.0

Installing the requirements:

$ pkg_add -r git autoconf automake libtool glib2

Building:

$ git clone git://sigrok.org/sigrok-cli
$ cd sigrok-cli
$ AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 ./autogen.sh
$ ./configure
$ make
$ make install

PulseView

Note: PulseView does not build on OpenBSD at the moment, this is being investigated.

Requirements:

• git
• g++ (>= 4.0)
• libtool
• pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
• cmake >= 2.6
• libglib >= 2.28.0
• Qt >= 4.5
• libboost >= 1.45 (including the following libs)
  • libboost-sytem
  • libboost-thread
• libsigrok >= 0.2.0
• libsigrokdecode >= 0.1.0

Installing the requirements:

$ pkg_add -r git libtool cmake glib2 qt4 boost-1.42.0p14

Building:

$ git clone git://sigrok.org/pulseview
$ cd pulseview
$ cmake .
$ make
$ sudo make install
$ cd ..

sigrok-gtk

Note: The GTK+ GUI is not yet usable!

Requirements:

• git
• gcc (>= 4.0)
• autoconf >= 2.63
• automake >= 1.11
• libtool
• pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
• libglib >= 2.28.0
• GTK+
• libsigrok >= 0.2.0

Installing the requirements:

$ pkg_add -r git autoconf automake libtool glib2 gtk+2

Building:

$ git clone git://sigrok.org/sigrok-gtk
$ cd sigrok-gtk
$ AUTOCONF_VERSION=2.69 AUTOMAKE_VERSION=1.12 ./autogen.sh
$ ./configure
$ make
$ make install

sigrok-qt

Note: The Qt GUI is not yet usable!

Requirements:

• git
• g++
• libtool
• pkg-config >= 0.22 (this is an integral part of OpenBSD, not an extra package, apparently)
• libglib >= 2.28.0
• Qt >= 4.5
• libsigrok >= 0.2.0
• libsigrokdecode >= 0.1.0

Installing the requirements:

$ pkg_add -r git libtool glib2 qt4

Building:

$ git clone git://sigrok.org/sigrok-qt
$ cd sigrok-qt
$ qmake4
$ make
$ make install