Hantek DSO-1200/Info

From sigrok
Revision as of 21:14, 1 November 2012 by Uwe Hermann (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

lsusb

This is the lsusb output on Linux:

$ lsusb -vvv
 Bus 005 Device 002: ID 4348:5539 WinChipHead
 Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               1.10
   bDeviceClass          255 Vendor Specific Class
   bDeviceSubClass       128 
   bDeviceProtocol        55 
   bMaxPacketSize0         8
   idVendor           0x4348 WinChipHead
   idProduct          0x5539 
   bcdDevice            1.00
   iManufacturer           1 Hantek
   iProduct                2 DSO12
   iSerial                 0 
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           39
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0 
     bmAttributes         0x80
       (Bus Powered)
     MaxPower              100mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           3
       bInterfaceClass       255 Vendor Specific Class
       bInterfaceSubClass    128 
       bInterfaceProtocol     55 
       iInterface              0 
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x82  EP 2 IN
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0040  1x 64 bytes
         bInterval               0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x02  EP 2 OUT
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0040  1x 64 bytes
         bInterval               0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            3
           Transfer Type            Interrupt
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0008  1x 8 bytes
         bInterval               0
 Device Status:     0x0000
   (Bus Powered)