Agilent 54600 Series
 | |
| Status | Not Supported |
|---|---|
| Source code | ? |
| Channels | 2-4 analog, 16 digital (D models only) |
| Samplerate | 200-2000MSa/s (depending on model) |
| Analog bandwidth | 60-500MHz (depending on model) |
| Vertical resolution | 8bits |
| Triggers | edge, pulse width, pattern, video, duration, sequence, CAN, USB, LIN, I2C, SPI |
| Input impedance | 1MΩ‖13pF 300Vrms CAT I, 100Vrms CAT II. 50Ω‖13pF 5Vrms (depending on model) |
| Memory | 4MSa-8MSa (mode/ch-dependent) (depending on model) |
| Display | 7" raster monochrome CRT |
| Connectivity | 3.5" 1.44MiB floppy, RS232, parallel port |
| Website | Keysight Technologies |
Models
| Model | Bandwidth (Hz) | Max Sample Rate (Sa/s) | Memory (MB) | Digital Inputs | Analog Inputs | Input Impedance (Ω) |
|---|---|---|---|---|---|---|
| 54621A | 60 M | 200 M | 4 | 2 | 1 M | |
| 54621D | 60 M | 200 M | 4 | 16 | 2 | 1 M |
| 54622A | 100 M | 200 M | 4 | 2 | 1 M | |
| 54622D | 100 M | 200 M | 4 | 16 | 2 | 1 M |
| 54624A | 100 M | 200 M | 4 | 4 | 1 M | |
| 54641A | 350 M | 2 G | 8 | 2 | 1 M, 50 | |
| 54641D | 350 M | 2 G | 8 | 16 | 2 | 1 M, 50 |
| 54642A | 500 M | 2 G | 8 | 2 | 1 M, 50 | |
| 54642D | 500 M | 2 G | 8 | 16 | 2 | 1 M, 50 |
Protocol
Communication with the 54600 Series is over the RS232 port on the back, or via the floppy drive. The RS232 protocol is described in the Programmer's Guide.
Links
- Communicating with the osciliscope in Python to perform a waveform dump - blog post explaining how the above code was written
Floppy Drive
The floppy drive is a TEAC FD-05HF.