Pico Technology PicoScope 2204A

From sigrok
Revision as of 06:47, 4 January 2020 by Gicking (talk | contribs) (start of page)
Jump to navigation Jump to search
PicoScope 2204A.

The Pico Technology PicoScope 2204A is a 2-channel USB-based PC oscilloscope (and spectrum analyzer and data logger and logic analyzer). It supports a bandwidth of 10MHz.

UP TO HERE

The max. sampling rate (one-shot) is 100 MS/s (one channel mode) or 20 MS/s (two channel mode). The max. sampling rate for repetitive signals is 1 GS/s, the max. sampling rate in continuous streaming mode is 1 MS/s.

See Pico Technology PicoScope 2203/Info for more details (such as lsusb -vvv output) about the device.

Hardware

  • Xilinx Spartan XC3S250E
  • Cypress CY7C68013A-56PVXC
  • Analog Devices AD9288
  • Analog Devices AD8132
  • Meder Electronics SIL05-1A72-71D
  • Maxim MAX889S
  • HC4052

Photos

  • Front

  • Back

  • PCB front

  • PCB back

See also this flickr set for more PCB photos of the device.

Protocol

Firmware

The usual Cypress FX2 firmware upload mechanism is used to upload a special FX2 firmware.

Start acquisition

Sample format

End acquisition

Triggers

Voltage ranges

Resources

Retrieved from "https://sigrok.org/w/index.php?title=Pico_Technology_PicoScope_2204A&oldid=14735"