HT USBee-DxPro

From sigrok
Revision as of 15:42, 17 July 2016 by Uwe Hermann (talk | contribs)
Jump to navigation Jump to search
HT USBee-DxPro
Status planned
Source code fx2lafw
Channels 8/16 + 2
Samplerate 24MHz
Samplerate (state) —
Triggers none (SW-only)
Min/max voltage ?
Memory none
Compression none
Website banggood.com

The HT USBee-DxPro is a USB-based, 16-channel logic analyzer with up to 24MHz sampling rate, and with 2 additional analog channels.

It is a clone of the CWAV USBee DX.

See HT USBee-DxPro/Info for some more details (such as lsusb -v output) on the device.

Note: Due to the fact that this device has two FX2 chips behind a USB hub inside, this will need extra code to enumerate correctly in sigrok.

Hardware

Photos

  • Package contents

  • Device, top

  • Device, bottom

  • Device, connectors

  • Device, USB

  • Package label

  • PCB, top

  • PCB, bottom

  • PCB, version

  • TLC5510I, 1

  • TLC5510I, 2

  • Cypress FX2, 1

  • Cypress FX2, 2

  • SMSC USB2512B

  • AMS1117

  • ICL7660, 1

  • ICL7660, 2

Protocol

Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.

Resources

Retrieved from "https://sigrok.org/w/index.php?title=HT_USBee-DxPro&oldid=11865"