Rigol DS1074Z
Revision as of 13:42, 4 March 2016 by Whitequark (talk | contribs) (→Protocol: Moved troubleshooting info to Rigol DS1000Z series)
 | |
| Status | supported |
|---|---|
| Source code | rigol-ds |
| Channels | 4 |
| Samplerate | 1GSa/s (1ch), 500MSa/s (2ch), 250MSa/s (3/4ch) |
| Analog bandwidth | 70MHz (upgradable up to 100 MHz) |
| Vertical resolution | 8bits (12bits HR) |
| Triggers | edge, pulse, runt, windows, nth edge, slope, video, pattern, delay, timeout, duration, setup/hold, RS232/UART, I²C, SPI |
| Input impedance | 1MΩ‖15pF 300V RMS CAT I |
| Memory | 12Mpts (24Mpts option) (mode/ch-dependent) |
| Display | 7" 800x480, 160K colors |
| Connectivity | USB host/device, Ethernet, trigger out, pass/fail out |
| Features | math: +, —, x, /, FFT, vertical sensitivity: 500µV/div - 10V/div |
| Website | rigolna.com |
The Rigol DS1074Z is a USB-based, 4-channel oscilloscope with an analog bandwidth of 70MHz and 1GS/s sampling rate.
See Rigol DS1074Z/Info for more details (such as lsusb -v output) about the device.
See Rigol DS1000Z series for information common to all devices in this series.
Photos
Rigol DS1074Z, front
Protocol
Example of using SCPI over LAN:
sigrok-cli -d rigol-ds:conn=tcp-raw/192.168.3.16/5555 -l 5 --scan sigrok-cli -d rigol-ds:conn=tcp-raw/192.168.3.16/5555 --frames 1 -O analog