Lcsoft Mini Board
Revision as of 20:53, 10 May 2011 by Bert (talk | contribs) (Created page with 'thumb|right|Lcsoft CY7C68013A Mini Board thumb|right|Back of PCB This is a barebones development board for…')
This is a barebones development board for the Cypress FX2 chip, as used in the Saleae Logic and other boards. It is available on Ebay for less than €15, or Taobao for even less.
Hardware
All the pins on the FX2 are broken out to 40 header pins. There's an on/off toggle switch, a reset button, and a jumper that lets you select whether the FX2 gets its configuration from a small EEPROM, or boots into the default mode. The EEPROM's default settings make it come up with the same VID:PID as a Saleae board.
Driver
The board is fully supported by sigrok, using the Saleae driver.