Voltcraft VC-920
Revision as of 11:46, 30 December 2014 by Uwe Hermann (talk | contribs)
 | |
| Status | supported |
|---|---|
| Source code | serial-dmm |
| Counts | 40000/4000 |
| IEC 61010-1 | CAT III (1000V) / CAT IV (600V) |
| Connectivity | RS232 / USB |
| Measurements | voltage, resistance, diode, continuity, capacitance, frequency, duty cycle, current, temperature |
| Features | autorange, hold, relative, min/max, bargraph, backlight |
| Website | conrad.de |
The Voltcraft VC-920 is a 40000/4000 counts, CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
This is a rebadged UNI-T UT71A.
See UNI-T UT71x series for information common to all devices in this series.
Hardware
Multimeter:
- 44000/440000-count dual-slope ADC: Cyrustek ES51966P (datasheet)
- 16-bit microcontroller: Texas Instruments MSP430F149 (markings "TI 87E817T G4 LSD0007 REV N") (datasheet)
- 128 (32 x 4) pattern multi-function LCD driver': Holtek HT1621B (datasheet)
- PCB markings: The silkscreen reads "71A V20051010-6", but the correct "920" model indication is apparently added manually by UNI-T using a sticker.
RS232 cable:
USB cable:
Photos
Multimeter:
PCB, top
PCB, bottom
RS232 cable:
See Device cables#UNI-T_UT-D02.
USB cable:
See Device cables#UNI-T_UT-D04.
Protocol
See UNI-T UT71x series#Protocol.