Saleae Logic8

From sigrok
Revision as of 00:00, 21 December 2014 by Adicarlo (talk | contribs) (Created page with "{{Infobox logic analyzer | image = 180px | name = Saleae Logic8 | status = unsupported | source_code_dir =...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Saleae Logic8
Saleae Logic16 bottom.png
Status unsupported
Source code N/A
Channels 8
Samplerate 100/50/40/25
Samplerate (state) —
Triggers none (SW-only)
Min/max voltage 1.8V — 5.5V
Compression yes
Website saleae.com

The Saleae Logic8 is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).

The case requires a Torx T7 screwdriver to open.


Teardown Images

case

Saleae Logic8 case top.jpg Saleae Logic8 case bottom.jpg Saleae Logic8 case rear.jpg

upper side of board

Saleae Logic8 board top.jpg Saleae Logic8 board top upper.jpg

bottom side of board

Saleae Logic8 board bottom.jpg Saleae Logic8 board bottom upper right.jpg

Spartan 6 FPGA


lsusb output

in a minute...

Retrieved from "https://sigrok.org/w/index.php?title=Saleae_Logic8&oldid=10342"