Velleman PCSGU250
The [1] is an inexpensive USB-based oscilloscope. It has 2 channels, an analog bandwidth of 12MHz and 25MS/s sampling rate.
See Velleman PCSU250/Info for more details (such as lsusb -vvv output) about the device.
Hardware
Control logic
- Xilinx XC3S50 50K-gate FPGA
- 50MHz crystal: 50.000 Y0KE (clock source for the Xilinx FPGA)
- Microchip PIC18LF2450-I/SP 8-bit microcontroller
USB interface
- inluded in the PIC
FROM HERE ON ONLY COPY&PASTE, TO BE CORRECTED
Analog frontend
- 2 x Unisonic ULN2003 7-channel darlington sink driver (each driving a set of 7 relays)
- 14 x SIR-S4-105A FZ Goodsky 5V relay (7 per input channel)
- 2 x Texas Instruments OPA354 op-amps
- 2 x National Semiconductor LMH6724 op-amps
- 2 x Texas Instruments ADC08L060 8-bit 60MSPS A/D converters
Channel triggers
- NXP 74LVC07AD Hex non-inverting buffers
- Texas Instruments TLC5620 8-bit quad DAC
- Texas Instruments TLC372 dual differential comparator
Power
- 3 x Texas Instruments TPS766xx voltage regulators (IC19=1V, IC20=2.5V, IC21=3.3V)
?
- Philips/NXP 74HC367D Hex buffer/line driver
Photos
Protocol
TODO.
Resources
- The vendor software appears to have been written by Magnova Components.