MCU123 Saleae Logic clone
Jump to navigation
Jump to search
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | ? |
| Memory | none |
| Compression | none |
| Website | mcu123.com |
The MCU123 Saleae Logic clone is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
It is a clone of the Saleae Logic. It's also very similar to the MCU123 USBee AX Pro clone minus the different USB vendor/device IDs.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
See MCU123 Saleae Logic clone/Info for more detailed information on the device.
Hardware
- Main chip: Cypress CY7C68013-56PVC (FX2)
- Input buffer: NXP 74HC245 (markings: "NXP HC245 2A7K508 UnD2 18E")
- 256-byte I2C EEPROM: Atmel AT24C02 (markings: "ATMEL211 24C02N SU27 D")
- 3.3V low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3 (markings: "AMS1117 3.3 HT240E")
- 24MHz crystal: 24.000
Photos
Package contents
Device, front
Device, back
PCB, top
PCB, bottom
EEPROM
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.
Resources
- Random aliexpress.com vendor (there are many)
- Random Taobao vendor (there are many)
- hotmcu.com shop