Sysclk SLA5032

**Sysclk SLA5032**
Status	planned
Channels	32
Samplerate	500MHz
Samplerate (state)	—
Triggers	low, high, rising, falling
Min/max voltage	-50V — 50V
Threshold voltage	VIH=1.6V, VIL=1.3V
Memory	2x 1Gbit DDR2 SDRAM
Compression	RLE
Website	sysclk.taobao.com

The Sysclk SLA5032 is a USB-based, 32-channel logic analyzer with up to 500MHz sampling rate.

See Sysclk SLA5032/Info for more details (such as lsusb -v output) about the device.

This devices can be switched into one of three different modes (the current mode is indicated by a green LED on the respective mode text):

32CH 500M: 500MHz sampling rate, 32 channels, max. 64Mbits storage per channel, support for hardware triggers (sysclk-sla5032 driver).
Saleae 100M: The device enumerates as a Saleae Logic16, streaming possible like with the Logic16, only software triggers (saleae-logic16 driver).
Saleae 500M: Similar to the above, but the max. sampling rate is actually 500MHz.

Switching between modes is done via the following mechanism: Plug the device into USB, after roughly half a second unplug it and re-plug it again. A green LED will now indicate that another mode was selected (it'll rotate through all three possible modes).