Embedded
The sigrok subprojects are all meant to be portable across various operating systems and architectures. Thus, they also compile and run fine on various embedded targets/boards.
IMPORTANT: This page is not meant as a generic setup/build tutorial for any of the listed boards. Please check the respective board manufacturer documentation, wiki, mailing lists, forums and so on if you need any help with setting up the system or (cross-)compiling packages etc. etc.
Raspberry Pi
Overview:
The Raspberry Pi is an ARM-based single-board computer based on the Broadcom BCM2835 SoC.
| Property | Value |
|---|---|
| SoC/CPU | Broadcom BCM2835 |
| Core/ISA | 700MHz ARM1176JZF-S core (ARM11 family, ARMv6 instruction set) |
| Architecture (uname -m) | armv6l |
| Bits | 32 |
| Endianness | little |
| (Cross-)compiler prefix | armv6l-unknown-linux-gnueabihf |
Please check the Raspberry Pi Wikipedia page for more information.
Notes:
- The installation of the build-requirements and building of the sigrok components is the same as on pretty much any other Linux system. Please check Linux for details.
- Using the recommended pre-built Debian image ("2013-07-26-wheezy-raspbian.zip") all sigrok components and frontends build and work fine. Various logic analyzers, DMMs, and other gear has been successfully tested.
BeagleBone Black (BBB)
Overview:
The BeagleBone Black (BBB) is an ARM-based single-board computer based on the Texas Instruments Sitara AM3359 SoC.
| Property | Value |
|---|---|
| SoC/CPU | Texas Instruments Sitara AM3359 |
| Core/ISA | 1GHz ARM Cortex-A8 core (ARMv7 instruction set) |
| Architecture (uname -m) | armv7l |
| Bits | 32 |
| Endianness | little |
| (Cross-)compiler prefix | armv7l-unknown-linux-gnueabi |
Notes:
- The installation of the build-requirements and building of the sigrok components is the same as on pretty much any other Linux system. Please check Linux for details.
- The default Ångström distribution for the BBB doesn't seem to ship all components required for the full usage of all sigrok components. E.g. there seems to be no Python3 (for libsigrokdecode), and no sdcc (for sigrok-firmware-fx2lafw). We recommend using a Debian image for better results.