Saleae Logic8
Jump to navigation
Jump to search
 | |
| Status | unsupported |
|---|---|
| Source code | N/A |
| Channels | 8 |
| Samplerate | 100/50/40/25 |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | 1.8V — 5.5V |
| Compression | yes |
| Website | saleae.com |
The Saleae Logic8 is a USB-based, 8-channel logic analyzer with 100/50/40/20MS sampling rate (at 3/6/7/8 enabled channels).
The case requires a Torx T7 screwdriver to open.
Teardown Images
case
Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination
upper side of board
Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination
bottom side of board
Error creating thumbnail: Unable to save thumbnail to destination
Error creating thumbnail: Unable to save thumbnail to destination
lsusb output
in a minute...