LabNation SmartScope
Revision as of 17:29, 3 December 2014 by Uwe Hermann (talk | contribs)
 | |
| Status | planned |
|---|---|
| Channels | 8 |
| Samplerate | 100MHz |
| Samplerate (state) | — |
| Triggers | low, high, rising, falling, edge |
| Min/max voltage | ? |
| Threshold voltage | Fixed: VIL=0.8V, VIH=2.0V |
| Memory | 4Msamples (8MByte SDRAM) |
| Compression | ? |
| Website | lab-nation.com |
The LabNation SmartScope is a USB-based mixed-signal oscilloscope (100 MS/s, 45MHz bandwidth), 8-channel logic analyzer (100MHz), arbitrary waveform generator / function generator.
See LabNation SmartScope/Info for some more details (such as lsusb -v output) on the device.
Hardware
- FPGA (3840 logic cells): Xilinx XC6SXL4 (datasheet)
- 64Mbit SDRAM: Alliance Memory AS4C4M16S (datasheet)
- Dual-channel, 8-bit, 100Msps ADC: Maxim MAX19506 (datasheet)
- 8-bit microcontroller with full-speed USB: Microchip PIC18F14K50 (datasheet)
- Single-pole normally-closed SOP OptoMOS relay: Ixys CPC1125N (datasheet)
- Quad buffer/line driver with 5V tolerant input/outputs, 3-state: 74LVC126A
Photos
Package, top
Package, bottom
Package, contents
Cables and probes
P6060 probe
Device, top
Device, bottom
Probe connector
Misc connectors
PCB, top
PCB, bottom
Analog frontend
Xilinx XC6SLX4
Alliance AS4C4M16S
Maxim MAX19506
Microchip 18LF14K50
CPC1125N
74LVC126A
OACI 45RC
