Hameg HMO compact series
Revision as of 01:53, 7 May 2014 by Uwe Hermann (talk | contribs) (Uwe Hermann moved page Hameg HMO Compact to Hameg HMO compact series without leaving a redirect)
 | |
| Status | supported |
|---|---|
| Source code | hameg-hmo |
| Channels | 2-4 analog, 8 digital |
| Samplerate | 2GSa/s (interleaved), 1GSA/s (non interleaved) |
| Analog bandwidth | 70-200MHz (depending on model) |
| Vertical resolution | 8bits (HiRes up to 10bits) |
| Triggers | pulse width, slope, video, pattern, serial bus (optional) |
| Input impedance | 1MΩ‖14pF 200Vp CAT I, 50Ω 5V RMS (model dependent) |
| Memory | 2Mpts (mode/ch-dependent) |
| Display | 6.5" VGA (640x480), 256 colors |
| Connectivity | USB host/device, RS232, ethernet (optional), GPIB (optional) |
| Features | math: + / — / x / FFT, statistics, vertical sensitivity: 1mV/div - 10V/div |
| Website | hameg.com |
The The Hameg HMO compact series are 70-200MHz, 2GSa/s, 2-4 analog channel and 8 digital channel digital storage oscilloscopes.
All models support different extension modules which provide different connectivity. Most models come with a HO720 (RS232, USB) module, other modules like the HO730 (USB, ethernet) and the HO740 (GPIB) are available optionally.
Devices
| Model | Bandwidth | Analog Channels | Digital Channels |
|---|---|---|---|
| HMO722 | 70MHz | 2 | 8 |
| HMO1022 | 100MHz | 2 | 8 |
| HMO1522 | 150MHz | 2 | 8 |
| HMO2022 | 200MHz | 2 | 8 |
| HMO724 | 70MHz | 4 | 8 |
| HMO1024 | 100MHz | 4 | 8 |
| HMO1524 | 150MHz | 4 | 8 |
| HMO2024 | 200MHz | 4 | 8 |
Protocol
All the devices use same SCPI protocol. The serial parameters are configurable on the device, the standard settings are: 8n2, no handshake, 115200 baud.