UNI-T UT60E
Status | supported |
---|---|
Source code | serial-dmm |
Counts | 4000 |
IEC 61010-1 | CAT III (1000V) / CAT IV (600V) |
Connectivity | RS232 / USB |
Measurements | voltage, current, resistance, capacitance, frequency, temperature, duty cycle, diode, continuity |
Features | autorange, true-rms, data hold, relative, backlight |
Website | uni-trend.com |
The UNI-T UT60E is a 4000 count CAT III (1000V) / CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.
It is similar to the Voltcraft VC-840, but not the same device/PCB (and also not just a rebranded device).
Hardware
- Multimeter IC: Fortune Semiconductor FS9721_LP3 (datasheet)
- Low power, True RMS-to-DC converter: Analog Devices AD737J (datasheet)
- JFET input single operational amplifier: ST TL062 (markings: "ST 062C EZ749") (datasheet)
- Crystal: 4MHz
- Fuses: 10A/250V and 500mA/250V (glass fuses)
RS232 cable:
USB cable:
Photos
Protocol
See Multimeter_ICs#Fortune_Semiconductor_FS9721_LP3.
Serial data transmission is always enabled on this multimeter.
Resources
- Manual
- Vendor software
- Henrik Haftmann: DMM.exe etc. (Windows software for various UNI-T DMMs, and lots of device/protocol info)
- Henrik Haftmann: UT60E log and protocol docs
- postcogito.org: UT60E Decoder Program
- perfec.to: Uni-T UT60E RS-232 Data Logging
- forums.ni.com: Short protocol description
- lionelsacks.com: Exercies: Reading out the Unit-Trend UT60E in Linux
- forums.ni.com: Another UT60E forum thread