Windows

sigrok-gui on Windows

This page describes how to build sigrok on Windows.

Building and installing the requirements

TortoiseGit

For checking out the sigrok source code you can use TortoiseGit on Windows.

• Download and install the latest version (for 32bit or 64bit Windows) of TortoiseGit (just double-click the *.msi installer).
• Download and install the latest version of the "full installer" of MSysGit (double-click the *.exe installer).

Mingw/MSYS

In order to build sigrok and various of its dependencies, we need a UNIX-like environment on Windows, which is provided by MinGW/MSYS.

• Download the latest version (20101030 currently) of the automated MinGW installer named mingw-get-inst (double-click the installer *.exe, which will download and install all components).
  • Make sure you enable "C++ compiler", and "MinGW Developer Toolkit" in the installer.
  • For simplicity it's recommended to leave the default install location of c:\MinGW unchanged.

autotools

Open a MinGW shell via Start/Programs/MinGW/MinGW Shell and do the following:

$ mingw-get update
$ mingw-get install msys-wget msys-unzip autoconf automake libtool

libglib

sigrok also needs libglib >= 2.0 (but not Gtk+), which in turn needs pkg-config and libintl. Download the latest versions of the respective Windows binaries and extract them into c:\MinGW\msys\1.0:

• glib_2.26.1-1_win32.zip
• glib-dev_2.26.1-1_win32.zip
• pkg-config_0.25-1_win32.zip
• pkg-config-dev_0.25-1_win32.zip
• proxy-libintl_20100902_win32.zip
• proxy-libintl-dev_20100902_win32.zip

Then run:

$ cd /c/MinGW/bin
$ cp libintl-8.dll intl.dll

libusb 1.0

$ git clone git://git.libusb.org/libusb-pbatard.git (or use TortoiseGit)
$ cd libusb-pbatard
$ ./autogen.sh
$ make
$ make install

libzip

Finally, we also need libzip. First, install its dependency zlib:

$ mingw-get install zlib msys-zlib-dev

Then, download libzip-0.9.3.tar.gz and extract it in c:\MinGW\msys\1.0.

$ cd /c/MinGW/msys/1.0
$ wget http://nih.at/libzip/libzip-0.9.3.tar.gz
$ tar xfvz libzip-0.9.3.tar.gz
$ cd libzip-0.9.3
$ autoreconf -i
$ ./configure --with-zlib=/c/MinGW/msys/1.0
$ make
$ make install

Python

We also need Python >= 2.5 for running the sigrok protocol decoders which are written in Python.

• Download and install the latest version (currently 2.6) of the Python Windows installer (just double-click the *.msi installer file).
  • For simplicity it's recommended to leave the default install location of c:\Python26 unchanged.

Qt

In order to also build sigrok-gui, download the latest version (>= 4.5) of the Qt SDK for Windows (LGPL version) and double-click the installer. The download includes the Qt libraries, Qt Creator, Qt Designer, and various other Qt development tools.

Building sigrok

Get the source code:

$ git clone git://sigrok.git.sourceforge.net/gitroot/sigrok/sigrok (or use TortoiseGit)
$ cd sigrok

Build the library and command line tool:

$ PKG_CONFIG_PATH=/usr/local/lib/pkgconfig ./autogen.sh
$ PKG_CONFIG_PATH=/usr/local/lib/pkgconfig ./configure
$ make
$ make install

Build the GUI:

• First, you need to copy some files into the gui/debug folder:

$ cd gui
$ PKG_CONFIG_PATH=/usr/local/lib/pkgconfig /c/Qt/2010.01/qt/bin/qmake
$ cd debug
$ cp /c/Qt/2010.01/qt/bin/libgcc_s_dw2-1.dll .
$ cp /c/Qt/2010.01/qt/bin/QtCored4.dll .
$ cp /c/Qt/2010.01/qt/bin/QtGui4.dll .
$ cd ../..

• Then, open the project in Qt Creator from within an MSYS shell:

$ cd gui
$ PKG_CONFIG_PATH=/usr/local/lib/pkgconfig /c/Qt/2010.01/qt/bin/qtcreator sigrok-gui.pro

• Build and run the project.