Difference between revisions of "Velleman PCSU1000"
Jump to navigation
Jump to search
Line 25: | Line 25: | ||
'''Channel triggers''' | '''Channel triggers''' | ||
* [http://www.nxp.com/products/logic/buffers_inverters_drivers/74LVC07AD.html NXP 74LVC07AD] Hex non-inverting * [http://www.ti.com/product/tlc5620 Texas Instruments TLC5620] 8-bit quad DAC | * [http://www.nxp.com/products/logic/buffers_inverters_drivers/74LVC07AD.html NXP 74LVC07AD] Hex non-inverting buffers | ||
* [http://www.ti.com/product/tlc5620 Texas Instruments TLC5620] 8-bit quad DAC | |||
* [http://www.ti.com/product/tlc372 Texas Instruments TLC372] dual differential comparator | * [http://www.ti.com/product/tlc372 Texas Instruments TLC372] dual differential comparator | ||
Revision as of 01:27, 19 November 2012
The Velleman PCSU1000 is an inexpensive USB-based oscilloscope. It has 2 channels, an analog bandwidth of 50MHz and 1GS/s sampling rate.
See Velleman PCSU1000/Info for more details (such as lsusb -vvv output) about the device.
Hardware
Control logic
- Xilinx XC3S50 50K-gate FPGA
- 50MHz crystal: 50.000 Y0KE (clock source for the Xilinx FPGA)
- Microchip PIC16F630-I/P 8-bit microcontroller
USB interface
- FTDI FT245BL USB interface chip
- 6MHz crystal
- Microchip 93LC46BI 128-byte EEPROM chip for the FTDI chip's USB settings
Analog frontend
- 2 x Unisonic ULN2003 7-channel darlington sink driver (each driving a set of 7 relays)
- 14 x SIR-S4-105A FZ Goodsky 5V relay (7 per input channel)
- 2 x Texas Instruments OPA354 op-amps
- 2 x National Semiconductor LMH6724 op-amps
- 2 x Texas Instruments ADC08L060 8-bit 60MSPS A/D converters
Channel triggers
- NXP 74LVC07AD Hex non-inverting buffers
- Texas Instruments TLC5620 8-bit quad DAC
- Texas Instruments TLC372 dual differential comparator
Power
- 3 x Texas Instruments TPS766xx voltage regulators (IC19=1V, IC20=2.5V, IC21=3.3V)
?
- Philips/NXP 74HC367D Hex buffer/line driver
Photos
Protocol
TODO.
Resources
- The vendor software appears to have been written by Magnova Components.