Difference between revisions of "RDing TEMPer"

Revision as of 22:50, 1 November 2012

RDing TEMPer

The RDing TEMPer is a USB-based temperature logger.

See RDing TEMPer/Info for more details (such as lsusb -vvv output) about the device.

Hardware

I2C, USB, LED

I2C/USB closeup

Main chip: Tenx TMU3101MS (datasheet)
- The markings were removed, but we're relatively sure it's this chip, due to lsusb and pin/feature matching (see below).
Temperature sensor: Fairchild FM75 (datasheet), I2C slave address 0x4f
I2C EEPROM: Unknown, yet (markings were removed), I2C slave address 0x50
Oscillator: 6MHz

Chip pinouts:

Main chip pinout

I2C EEPROM pinout

SCL	1-	O	-20	3.3V
SDA	2-		-19
5V	3-		-18
5V	4-		-17	3.3V
5V	5-		-16	5V
5V	6-		-15	LED(5V)
GND	7-		-14	USB D+
5V	8-		-13	USB D-
3.3V	9-		-12	5V
Oscillator	10-		-11	Oscillator

GND	1-	O	-8	3.3V
GND	2-		-7	GND
GND	3-		-6	SCL
GND	4-		-5	SDA

See these example sigrok captures for the I2C, USB, and LED traffic going on while the device is queried from the PC (see also screenshots on the right-hand side).

Example usage:

$ sigrok-cli -i rding_temper_i2c_usb_led_sensor_5s.sr -a i2c:sda=0:scl=1
i2c: "START" 
i2c: "ADDRESS READ" "0x4f" 
i2c: "ACK" 
i2c: "DATA READ" "0x1d" 
i2c: "ACK" 
i2c: "DATA READ" "0x80" 
i2c: "ACK" 
i2c: "STOP"

$ sigrok-cli -i rding_temper_i2c_usb_led_sensor_5s.sr -a usb:dm=3:dp=4:signalling=low-speed
usb: "SYNC INVALID!" "001001001100100" 
usb: "SYNC INVALID!" "000000000000110000000111111100100000000010001" 
usb: "SYNC INVALID!" "0000000000011100000011000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000111111001000101111" 
usb: "SYNC INVALID!" "000000000000001001000010011" 
usb: "OUT DEV 47 EP 0" "00000001100001111111010000001001" 
usb: "DATA1 00 00 00 00 00 00 00 00 " "000000011101001000000000000000000000000000000000000000000000000000000000000000001111110100101111" 
usb: "SYNC INVALID!" "00000000101001011" 
usb: "OUT DEV 47 EP 0" "00000001100001111111010000001001" 
usb: "DATA0 00 00 00 00 00 00 00 00 " "000000011100001100000000000000000000000000000000000000000000000000000000000000001111110100101111" 
usb: "SYNC INVALID!" "00000000101001011" 
usb: "IN DEV 47 EP 0" "00000001100101101111010000001001" 
usb: "DATA1 " "00000001110100100000000000000000" 
usb: "ACK " "0000000101001011"

Photos

Device, front
Device, back
Device, USB
Device, opened
PCB, front
PCB, back
Sensor, EEPROM
Random pads on the side
Main chip, microscope
Sensor, microscope

Protocol

HID-based.

Resources

Relavak Labs: TEMPer Temperature Sensor Linux Driver (libusb software)
LinuxJournal: Hack and / - Temper Temper (article about Device::USB::PCSensor::HidTEMPer perl module)
Polarnight blog: TEMPer USB Temperature Sensor – Inside! (a teardown of an older TEMPer version)
bil: Software to support the TEMPer USB thermistor (blog post)
Jonathan Gazeley: Nagios plugin for TEMPer USB thermometer (also: TEMPer2.c, code for the USB-to-serial version)
Tollef Fog Heen's blog: Kernel patches and the TEMPer USB thermometer (also: TEMPer.c)
No Feature Left behind: Taking advantage of your TEMPer 1.0 USB device (C#, .NET)
Device::USB::PCSensor::HidTEMPer (Perl)
Eclectic Security: Dirt cheap USB Temperature Sensor with python SMS alerting system (also: Pytemp2sms)
CircuitDB: Cheap temperature logging
RJL: Using Cacti to measure temperatures
SourceForge: UTAC (C#, .NET)
Github: TEMPered, temperhum, HID-TEMPerHUM, rbtemper, TEMPer1X, temper1, temper, temper, temper-hum-hid

@@ Line 10: / Line 10: @@
 [[File:Rding temper sigrok 2.png|thumb|right|I2C/USB closeup]]
-* Main chip: [http://www.dz863.com/datasheet-827607263-TMU3101MS_Usb-Controller/ Tenx TMU3101MS] ([http://www.dz863.com/downloadpdf-cflolocfmpbs-TMU3101MS.pdf datasheet])
+* '''Main chip''': [http://www.dz863.com/datasheet-827607263-TMU3101MS_Usb-Controller/ Tenx TMU3101MS] ([http://www.dz863.com/downloadpdf-cflolocfmpbs-TMU3101MS.pdf datasheet])
 ** The markings were removed, but we're relatively sure it's this chip, due to lsusb and pin/feature matching (see below).
-* Temperature sensor: [http://www.fairchildsemi.com/pf/FM/FM75.html Fairchild FM75] ([http://www.fairchildsemi.com/ds/FM/FM75.pdf datasheet]), I2C slave address '''0x4f'''
+* '''Temperature sensor''': [http://www.fairchildsemi.com/pf/FM/FM75.html Fairchild FM75] ([http://www.fairchildsemi.com/ds/FM/FM75.pdf datasheet]), I2C slave address '''0x4f'''
-* I2C EEPROM: Unknown, yet (markings were removed), I2C slave address '''0x50'''
+* '''I2C EEPROM''': Unknown, yet (markings were removed), I2C slave address '''0x50'''
-* Oscillator: 6MHz
+* '''Oscillator''': 6MHz
-Main chip pinout:
+'''Chip pinouts:'''
+<table border="0">
+<tr>
+<th>Main chip pinout</th>
+<th>I2C EEPROM pinout</th>
+</tr>
+<tr><td>
+{| border="0" cellspacing="0"
+|-
+| style="width: 10em; font-weight: bold;" align="right" | SCL
+| style="width: 2em;" align="right"  | 1-
+| rowspan="10" valign="top" style="width: 10em; background-color: #333333; color: white;font-weight: bold;" | &nbsp;&nbsp;O
+| style="width: 2em;" | -20
+| style="width: 10em; font-weight: bold;" | 3.3V
+|-
+| style="width: 10em; font-weight: bold;" align="right" | SDA
+| style="width: 2em;" align="right"  | 2-
+| style="width: 2em;" | -19
+| style="width: 10em; font-weight: bold;" |
+|-
+| style="width: 10em; font-weight: bold;" align="right" | 5V
+| style="width: 2em;" align="right"  | 3-
+| style="width: 2em;" | -18
+| style="width: 10em; font-weight: bold;" |
+|-
+| style="width: 10em; font-weight: bold;" align="right" | 5V
+| style="width: 2em;" align="right"  | 4-
+| style="width: 2em;" | -17
+| style="width: 10em; font-weight: bold;" | 3.3V
+|-
+| style="width: 10em; font-weight: bold;" align="right" | 5V
+| style="width: 2em;" align="right"  | 5-
+| style="width: 2em;" | -16
+| style="width: 10em; font-weight: bold;" | 5V
+|-
+| style="width: 10em; font-weight: bold;" align="right" | 5V
+| style="width: 2em;" align="right"  | 6-
+| style="width: 2em;" | -15
+| style="width: 10em; font-weight: bold;" | LED(5V)
-{| border="0" width="60%" style="font-size: smaller" class="sigroktable"
 |-
-!1
+| style="width: 10em; font-weight: bold;" align="right" | GND
-!2
+| style="width: 2em;" align="right"  | 7-
-!3
+| style="width: 2em;" | -14
-!4
+| style="width: 10em; font-weight: bold;" | USB D+
-!5
-!6
-!7
-!8
-!9
-!10
 |-
-| '''SCL'''
+| style="width: 10em; font-weight: bold;" align="right" | 5V
-| '''SDA'''
+| style="width: 2em;" align="right"  | 8-
-| 5V/high
+| style="width: 2em;" | -13
-| 5V/high
+| style="width: 10em; font-weight: bold;" | USB D-
-| 5V/high
-| 5V/high
-| '''GND'''
-| 5V/high
-| 3.3V
-| '''Oscillator'''
-|}
-{| border="0" width="60%" style="font-size: smaller" class="sigroktable"
 |-
-!11
+| style="width: 10em; font-weight: bold;" align="right" | 3.3V
-!12
+| style="width: 2em;" align="right"  | 9-
-!13
+| style="width: 2em;" | -12
-!14
+| style="width: 10em; font-weight: bold;" | 5V
-!15
-!16
-!17
-!18
-!19
-!20
 |-
-| '''Oscillator'''
+| style="width: 10em; font-weight: bold;" align="right" | Oscillator
-| 5V/high
+| style="width: 2em;" align="right"  | 10-
-| '''USB D-'''
+| style="width: 2em;" | -11
-| '''USB D+'''
+| style="width: 10em; font-weight: bold;" | Oscillator
-| '''LED (5V)'''
-| 5V
-| 3.3V
-|
-|
-| 3.3V
 |}
-I2C EEPROM pinout:
+</td><td>
-{| border="0" style="font-size: smaller" class="sigroktable"
+{| border="0" cellspacing="0"
 |-
-!1
+| style="width: 10em; font-weight: bold;" align="right" | GND
-!2
+| style="width: 2em;" align="right"  | 1-
-!3
+| rowspan="10" valign="top" style="width: 10em; background-color: #333333; color: white;font-weight: bold;" | &nbsp;&nbsp;O
-!4
+| style="width: 2em;" | -8
-!5
+| style="width: 10em; font-weight: bold;" | 3.3V
-!6
-!7
-!8
 |-
-| GND
+| style="width: 10em; font-weight: bold;" align="right" | GND
-| GND
+| style="width: 2em;" align="right"  | 2-
-| GND
+| style="width: 2em;" | -7
-| GND
+| style="width: 10em; font-weight: bold;" | GND
-| '''SDA'''
-| '''SCL'''
+|-
-| GND
+| style="width: 10em; font-weight: bold;" align="right" | GND
-| 3.3V
+| style="width: 2em;" align="right"  | 3-
+| style="width: 2em;" | -6
+| style="width: 10em; font-weight: bold;" | SCL
+|-
+| style="width: 10em; font-weight: bold;" align="right" | GND
+| style="width: 2em;" align="right"  | 4-
+| style="width: 2em;" | -5
+| style="width: 10em; font-weight: bold;" | SDA
 |}
+</td></tr></table>
 See [http://sigrok.org/gitweb/?p=sigrok-dumps.git;a=tree;f=i2c/rding_temper;hb=HEAD these example sigrok captures] for the I2C, USB, and LED traffic going on while the device is queried from the PC (see also screenshots on the right-hand side).
-Example usage:
+'''Example usage:'''
 <small>

Difference between revisions of "RDing TEMPer"

Revision as of 22:50, 1 November 2012

Contents

Hardware

Photos

Protocol

Resources

Navigation menu

Difference between revisions of "RDing TEMPer"

Revision as of 22:50, 1 November 2012

Hardware

Photos

Protocol

Resources

Navigation menu

Search