Difference between revisions of "TekPower TP4000ZC"
| Line 7: | Line 7: | ||
== Hardware == | == Hardware == | ||
* '''Multimeter IC''': The microcontroller is an unidentifiable plastic blob. | * '''Multimeter IC''': The microcontroller is an unidentifiable plastic blob. Based on the communication protocol, the chip seems to be a [[Fortune Semiconductor FS9721]] | ||
* LM358 opamp | * LM358 opamp | ||
* HEF4013BT flip-flop | * HEF4013BT flip-flop | ||
Revision as of 06:10, 30 October 2012
The TekPower TP4000ZC is a 4000 counts, CAT II (600V) handheld digital multimeter with RS232 connectivity.
This multimeter appears to be a rebadged Digitek DT4000ZC.
Hardware
- Multimeter IC: The microcontroller is an unidentifiable plastic blob. Based on the communication protocol, the chip seems to be a Fortune Semiconductor FS9721
- LM358 opamp
- HEF4013BT flip-flop
The RS-232 connector is a standard 3.5m stereo jack, with the ring left unconnected. The transmitter is optically insulated from the rest of the device. The DB-9 connector has a loopback resistor between the RX and TX pins.
Photos
Device, angle
Mugshot
Device, back
Package contents
Holster removed, front
Holster removed, back
Battery compartment
Rear cover
Front cover
Rear cover, PCB removed
PCB, front
PCB, back
Chip
HEF4013BT flip-flop
LM358 opamp
RS-232 optoisolation
RS-232 module
RS-232 PCB, bottom
RS-232 PCB, top
Supplied RS-232 cable
RS-232 cable, disassembled
RS-232 cable, detail
Protocol
See Fortune Semiconductor FS9721#Protocol.
- User bit 2 is used to indicate temperature measurement in degrees Celsius.
Segment lettering
| C | ||
| B | G | |
| F | ||
| A | E | |
| D |