Difference between revisions of "ASIX SIGMA/Info"
Jump to navigation
Jump to search
(Created page with 'lsusb output: Bus 001 Device 018: ID a600:a000 Asix Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass …') |
Uwe Hermann (talk | contribs) m |
||
| Line 1: | Line 1: | ||
lsusb | == lsusb before firmware upload == | ||
Bus 001 Device 018: ID a600:a000 Asix | $ '''lsusb -vvv''' | ||
Bus 001 Device 018: ID '''a600:a000 Asix''' | |||
Device Descriptor: | Device Descriptor: | ||
bLength 18 | bLength 18 | ||
| Line 60: | Line 61: | ||
Device Status: 0x0000 | Device Status: 0x0000 | ||
(Bus Powered) | (Bus Powered) | ||
== lsusb after firmware upload == | |||
No changes, the '''lsusb -vvv''' output is exactly identical. | |||
__FORCETOC__ | |||
Revision as of 23:29, 12 April 2010
lsusb before firmware upload
$ lsusb -vvv
Bus 001 Device 018: ID a600:a000 Asix
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0xa600 Asix
idProduct 0xa000
bcdDevice 6.00
iManufacturer 1 ASIX
iProduct 2 ASIX SIGMA
iSerial 3 A6010243
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 498mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 ASIX SIGMA
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
lsusb after firmware upload
No changes, the lsusb -vvv output is exactly identical.