Difference between revisions of "UNI-T UT181A"
Jump to navigation
Jump to search
m (markup nits) |
(add some features to the existing description, unbreak an external link) |
||
| Line 7: | Line 7: | ||
| categories = CAT IV (600V) / CAT III (1000V) | | categories = CAT IV (600V) / CAT III (1000V) | ||
| connectivity = [[Device_cables#UNI-T_UT-D09|UT-D09 (USB)]] / [[Device_cables#UNI-T_UT-D07A|UT-D07A (BLE)]] | | connectivity = [[Device_cables#UNI-T_UT-D09|UT-D09 (USB)]] / [[Device_cables#UNI-T_UT-D07A|UT-D07A (BLE)]] | ||
| measurements = voltage, current, resistance, capacitance, frequency, duty cycle, diode, continuity, temperature | | measurements = voltage, current, resistance, capacitance, frequency, duty cycle, period, diode, continuity, temperature, gain | ||
| features = autorange, true-rms, data hold, min/max/avg, peak, relative, bargraph, backlight, logging | | features = autorange, true-rms, data hold, min/max/avg, peak, relative, bargraph, backlight, logging | ||
| website = [https://www.uni-trend.com/index.php?m=content&c=index&a=show&catid=148&id=16 uni-trend.com] | | website = [https://www.uni-trend.com/index.php?m=content&c=index&a=show&catid=148&id=16 uni-trend.com] | ||
}} | }} | ||
The '''UNI-T UT181A''' is a logging digital multimeter with PC connectivity. | The '''UNI-T UT181A''' is a 60000 count 0.025% accuracy logging digital multimeter with PC connectivity. | ||
See [[Device cables#UNI-T_UT-D09|UT-D09]] and [[Device cables#UNI-T_UT-D07A|UT-D07A]] for typical cables. | See [[Device cables#UNI-T_UT-D09|UT-D09]] and [[Device cables#UNI-T_UT-D07A|UT-D07A]] for typical cables. | ||
Users need to enable communication in the meter's menu system before starting the application ('''SETUP''' -> '''Communication''' -> '''ON'''). | Users need to enable communication in the meter's menu system before starting the application ('''SETUP''' -> '''Communication''' -> '''ON'''). | ||
| Line 28: | Line 28: | ||
== Resources == | == Resources == | ||
* [https://github.com/antage/ut181a | * [https://github.com/antage/ut181a '''ut181a''' DMM library] and [https://github.com/antage/ut181a-cli '''ut181a-cli''' application] | ||
* [https://github.com/antage/ut181a/blob/master/Protocol.md UT181A protocol description] | * [https://github.com/antage/ut181a/blob/master/Protocol.md UT181A protocol description] | ||
Revision as of 18:05, 17 March 2020
 | |
| Status | planned |
|---|---|
| Counts | 60000 |
| IEC 61010-1 | CAT IV (600V) / CAT III (1000V) |
| Connectivity | UT-D09 (USB) / UT-D07A (BLE) |
| Measurements | voltage, current, resistance, capacitance, frequency, duty cycle, period, diode, continuity, temperature, gain |
| Features | autorange, true-rms, data hold, min/max/avg, peak, relative, bargraph, backlight, logging |
| Website | uni-trend.com |
The UNI-T UT181A is a 60000 count 0.025% accuracy logging digital multimeter with PC connectivity. See UT-D09 and UT-D07A for typical cables. Users need to enable communication in the meter's menu system before starting the application (SETUP -> Communication -> ON).
Protocol and usage
Currently there is no sigrok driver for the UT181A device. An external MIT licensed project which was written in the Rust programming language also contains a description of the protocol, see the Resources section below. This will be useful in the creation of a sigrok driver.
The choice of a serial cable and the meter's specific protocol are independent from each other. A WorkInProgress driver was used with the UT-D09 cable like this:
$ sigrok-cli --list-serial $ sigrok-cli -d uni-t-ut181a:conn=hid/cp2110/raw=/dev/hidraw0 --samples 10