Difference between revisions of "Instrustar ISDS205A"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) (Microchip 24LC64I pinout.) |
Uwe Hermann (talk | contribs) |
||
Line 2: | Line 2: | ||
| image = | | image = | ||
| name = Instrustar ISDS205A | | name = Instrustar ISDS205A | ||
| status = | | status = planned | ||
| source_code_dir = | | source_code_dir = | ||
| channels = 2 | | channels = 2 | ||
| samplerate = | | samplerate = 48MHz | ||
| samplerate_equiv = | | samplerate_equiv = | ||
| bandwidth = | | bandwidth = 20MHz | ||
| vertical_resolution = 8bit | | vertical_resolution = 8bit | ||
| triggers = | | triggers = none (SW-only) | ||
| input_impedance = 1MΩ‖25pF | | input_impedance = 1MΩ‖25pF | ||
| memory = | | memory = none | ||
| display = | | display = none | ||
| connectivity = USB | | connectivity = USB | ||
| features = | | features = | ||
| website = [http://instrustar.com instrustar.com] | | website = [http://instrustar.com instrustar.com] | ||
}} | }} | ||
The Instrustar ISDS205A is a | The [http://english.instrustar.com/product_detail.asp?nid=1556 Instrustar ISDS205A] is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MS/s and 48MS/s sampling rate. | ||
See [[ | See [[Instrustar ISDS205A/Info]] for more details (such as '''lsusb -v''' output) on the device. | ||
== Hardware == | == Hardware == | ||
Line 182: | Line 182: | ||
<gallery> | <gallery> | ||
File:Instrustar-IDS205A CaseFront.jpg|<small> | File:Instrustar-IDS205A CaseFront.jpg|<small>Device, top</small> | ||
File:Instrustar-IDS205A CaseBack.jpg|<small> | File:Instrustar-IDS205A CaseBack.jpg|<small>Device, bottom</small> | ||
File:Instrustar-IDS205A PCBfront.jpg|<small>PCB, | File:Instrustar-IDS205A PCBfront.jpg|<small>PCB, top</small> | ||
File:Instrustar-IDS205A PCBback.jpg|<small>PCB, | File:Instrustar-IDS205A PCBback.jpg|<small>PCB, bottom</small> | ||
File:Instrustar-IDS205A IC1.jpg|<small> | File:Instrustar-IDS205A IC1.jpg|<small>2x mux, ADC, shift-reg</small> | ||
File:Instrustar-IDS205A IC2.jpg|<small> | File:Instrustar-IDS205A IC2.jpg|<small>(1 of 2) mux, ADC, shift-reg, USB, EEPROM, crystal</small> | ||
File:Instrustar-IDS205A IC3.jpg|<small>Jacks, | File:Instrustar-IDS205A IC3.jpg|<small>Jacks, reed switches, calibration. 2x mux, ADC, USB, crystal</small> | ||
</gallery> | </gallery> | ||
== Resources == | == Resources == | ||
* [http://www.aliexpress.com/item/ISDS205A-Virtual-PC-USB-oscilloscope-2CH-20-MHz-48MSa-s-FFT-analyzer-Data-Logger/32374001270.html | * [http://www.aliexpress.com/item/ISDS205A-Virtual-PC-USB-oscilloscope-2CH-20-MHz-48MSa-s-FFT-analyzer-Data-Logger/32374001270.html Aliexpress page] | ||
* [http://instrustar.com/upload/user%20guide/ISDS205%20User%20Guide.pdf User Guide] | * [http://instrustar.com/upload/user%20guide/ISDS205%20User%20Guide.pdf User Guide] | ||
* [http://instrustar.com/instrustar_com/upload/software/SDK%202.6.zip SDK 2.6] | * [http://instrustar.com/instrustar_com/upload/software/SDK%202.6.zip SDK 2.6] |
Revision as of 00:35, 3 April 2017
Status | planned |
---|---|
Channels | 2 |
Samplerate | 48MHz |
Analog bandwidth | 20MHz |
Vertical resolution | 8bit |
Triggers | none (SW-only) |
Input impedance | 1MΩ‖25pF |
Memory | none |
Display | none |
Connectivity | USB |
Website | instrustar.com |
The Instrustar ISDS205A is a USB-based, 2-channel oscilloscope with an analog bandwidth of 20MS/s and 48MS/s sampling rate.
See Instrustar ISDS205A/Info for more details (such as lsusb -v output) on the device.
Hardware
- Cypress FX2LP CY7C68013AC (USB 2.0 HS controller, TQFP100)
- Analog Devices AD9288 (ADC)
- Microchip 24LC64I (64K I²C EEPROM)
- (2)NXP 74HC4051 (8-Channel Analog Mux)
- NXP 74HC595D (8bit Shift Register (Serial-in to Serial or Parallel-out))
- Oscillator GZX24.000 (24MHz crystal)
- (4) Huike (Shenzhen) HK23F-DC5V-SHG (Reed switch)
Cypress FX2 pinout:
PD5 | 1- | O | -56 | PD4 |
PD6 | 2- | -55 | PD3 | |
PD7 | 3- | -54 | PD2 | |
GND | 4- | -53 | PD1 | |
CLKOUT | 5- | -52 | PD0 | |
VCC | 6- | -51 | *WAKEUP | |
GND | 7- | -50 | VCC | |
RDY0/*SLRD | 8- | -49 | RESET# | |
RDY1/*SLWR | 9- | -48 | GND | |
AVCC | 10- | -47 | PA7 | |
(24MHz crystal) XTALOUT | 11- | -46 | PA6 (74HC595D, SHCP) | |
(24MHz crystal) XTALIN | 12- | -45 | PA5 (74HC595D, STCP) | |
AGND | 13- | -44 | PA4 (74HC595D, DS) | |
AVCC | 14- | -43 | PA3 | |
(USB D+) DPLUS | 15- | -42 | PA2 | |
(USB D-) DMINUS | 16- | -41 | PA1 | |
AGND | 17- | -40 | PA0 (1kHz scope cal pin) | |
VCC | 18- | -39 | VCC | |
GND | 19- | -38 | CTL2 | |
(CTL0, AD9288 ENCA/B) *IFCLK | 20- | -37 | CTL1 | |
RESERVED | 21- | -36 | CTL0 (IFCLK, AD9288 ENCA/B) | |
(EEPROM SCL) SCL | 22- | -35 | GND | |
(EEPROM SDA) SDA | 23- | -34 | VCC | |
VCC | 24- | -33 | GND | |
PB0 | 25- | -32 | PB7 | |
PB1 | 26- | -31 | PB6 | |
PB2 | 27- | -30 | PB5 | |
PB3 | 28- | -29 | PB4 |
NXP 74HC595D pinout:
(upper 74HC4051D, S0) Q1 | 1- | O | -16 | VCC |
(lower 74HC4051D, S0) Q2 | 2- | -15 | Q0 (upper 74HC4051D, S1) | |
(lower 74HC4051D, S1) Q3 | 3- | -14 | DS (FX2 PA4) | |
Q4 | 4- | -13 | OE# (GND) | |
Q5 | 5- | -12 | STCP (FX2 PA5) | |
Q6 | 6- | -11 | SHCP (FX2 PA6) | |
Q7 | 7- | -10 | MR# (VCC) | |
GND | 8- | -9 | Q7S |
Upper NXP 74HC4051D (CH1) pinout:
Y4 | 1- | O | -16 | VCC |
Y6 | 2- | -15 | Y2 | |
Z | 3- | -14 | Y1 | |
Y7 | 4- | -13 | Y0 | |
Y5 | 5- | -12 | Y3 | |
(GND) E# | 6- | -11 | S0 (NXP 74HC595D, Q1) | |
VEE | 7- | -10 | S1 (NXP 74HC595D, Q0) | |
GND | 8- | -9 | S2 (GND) |
Lower NXP 74HC4051D (CH2) pinout:
Y4 | 1- | O | -16 | VCC |
Y6 | 2- | -15 | Y2 | |
Z | 3- | -14 | Y1 | |
Y7 | 4- | -13 | Y0 | |
Y5 | 5- | -12 | Y3 | |
(GND) E# | 6- | -11 | S0 (NXP 74HC595D, Q2) | |
VEE | 7- | -10 | S1 (NXP 74HC595D, Q3) | |
GND | 8- | -9 | S2 (GND) |
Microchip 24LC64I pinout:
(VCC) A0 | 1- | O | -8 | VCC |
(GND) A1 | 2- | -7 | WP (GND) | |
(GND) A2 | 3- | -6 | SCL (FX2 SCL) | |
VSS | 4- | -5 | SDA (FX2 SDA) |