Difference between revisions of "MASTECH MAS345"

From sigrok
Jump to navigation Jump to search
m
(details on the driver to use, which is probably helpful to the user)
 
Line 40: Line 40:
* See [[Device_cables#Metex_5-pin_RS232_cable]].
* See [[Device_cables#Metex_5-pin_RS232_cable]].


== Driver ==
Uses the driver '''mastech-mas345'''.  You'll generally need the 'conn' driver option to specify the serial device to use.
Example:
  sigrok-cli --driver mastech-mas345:conn=/dev/ttyUSB0 --samples 10
== Photos ==
== Photos ==


Latest revision as of 06:36, 20 January 2016

MASTECH MAS345
Mastech mas345 device front.png
Status supported
Source code serial-dmm
Counts 4000
IEC 61010-1 CAT II
Connectivity RS232
Measurements voltage, current, resistance, capacitance, temperature, hFE, diode, continuity
Features autorange, data hold, bargraph, backlight
Website p-mastech.com

The MASTECH MAS345 is a 4000 counts, CAT II handheld digital multimeter with RS232 connectivity.

It is also sold under the names Circuit Specialists CSI3451, Global Specialties Pro-70, McVoice M-345pro, Sinometer MAS345. and Velleman DVM345DI.

1 The software shipped by Circuit Specialists is MasView 1.1.

Hardware

Multimeter:

  • Main chip: MASTECH Japan M343-01 F0951D174 (80 pins, 16 + 16 + 24 + 24)
  • 14-stage binary counter/oscillator: ST 74HC4060 (datasheet) (marking: "ST 74HC4060 N00U732")
  • Precision perational amplifier: Texas Instruments OP07C (datasheet) (marking: "12AL9JM 0P07CP")
  • CMOS multifunctional time base circuit: Green Sea Technology GC7555AP (datasheet, English translation) (marking: "GC7555AP AA7057HS")
    • This is an NE555 compatible chip, apparently.
  • General-purpose photocoupler: Sharp PC817 (datasheet) (marking: "B > B5 PC817 Sharp")
    • "B": model = PC817X2J000F/PC817XF2J00F, ">": China factory, "B5": date code == May 1991
  • General-purpose photocoupler: Sharp PC817 (datasheet) (marking: "B > B6 PC817 Sharp")
    • "B": model = PC817X2J000F/PC817XF2J00F, ">": China factory, "B6": date code == June 1991
  • Crystal: ca. 32kHz
  • Fuse: 15A/250V (6x30mm) (for the 10A jack; interestingly the PCB silkscreen says "20A" for that jack)

RS232 cable:


Driver

Uses the driver mastech-mas345. You'll generally need the 'conn' driver option to specify the serial device to use.

Example: 

 sigrok-cli --driver mastech-mas345:conn=/dev/ttyUSB0 --samples 10

Photos

Multimeter:

  • Outer package

  • Package

  • Package, open

  • Package contents

  • Device, rubber holster

  • Device, front

  • Device, back

  • Probes

  • Temperature probe

  • LCD

  • LCD w/ backlight

  • Device, open

  • Front cover

  • PCB, front

  • PCB, front, w/o LCD

  • PCB, front top

  • PCB, front middle

  • PCB, front bottom

  • PCB, back 1

  • PCB, back 2

  • LCD 1

  • LCD 2

  • RS232 connector

  • MASTECH M343-01

  • GC7555AP

  • Sharp PC817

  • ST 74HC4060

  • TI OP07C

RS232 cable:

See Device_cables#Metex_5-pin_RS232_cable.

Protocol

The protocol is (partially) documented in the vendor software's "Help" window (seems to apply to MAS343, MAS344, and MAS345; the M9803R protocol is different).

See Multimeter_ICs#Metex_14-byte_ASCII for the DMM IC protocol.

Resources

Retrieved from "https://sigrok.org/w/index.php?title=MASTECH_MAS345&oldid=11384"