Difference between revisions of "Rigol DS1052E"

**Rigol DS1052E**
Status	supported
Source code	rigol-ds
Channels	2
Samplerate	1GSa/s (1ch), 500MSa/s (2ch)
Samplerate (eq. time)	10GSa/s
Analog bandwidth	50MHz
Vertical resolution	8bits
Triggers	edge, pulse width, slope, video, pattern, continuous time, alternate
Input impedance	1MΩ‖15pF 300V RMS CAT I
Memory	1Mpts (mode/ch-dependent)
Display	5.7" QVGA (320x240), 64K colors
Connectivity	USB host/device, RS232, pass/fail out
Features	math: + / — / x / FFT, vertical sensitivity: 2mV/div - 10V/div
Website	rigolna.com

Revision as of 16:55, 4 January 2014

The Rigol DS1052E is a 50MHz, 1GSa/s, 2-channel digital storage oscilloscope.

See Rigol DS1052E/Info for more details (such as lsusb -v output) about the device.

TODO.

The device uses USBTMC for communication with a host PC.

@@ Line 5: / Line 5: @@
 | source_code_dir     = rigol-ds
 | channels            = 2
-| samplerate          = 1GSa/s（1ch), 500MSa/s（2ch)
+| samplerate          = 1GSa/s (1ch), 500MSa/s (2ch)
 | samplerate_equiv    = 10GSa/s
 | bandwidth           = 50MHz
 | vertical_resolution = 8bits
 | triggers            = edge, pulse width, slope, video, pattern, continuous time, alternate
-| input_impedance     = 1MΩ‖15pF 300 V RMS CAT I
+| input_impedance     = 1MΩ‖15pF 300V RMS CAT I
 | memory              = 1Mpts (mode/ch-dependent)
 | display             = 5.7" QVGA (320x240), 64K colors
 | connectivity        = USB host/device, RS232, pass/fail out
-| features            = math: + / &mdash; / x / FFT, vertical sensitivity: 2 mV/div - 10V/div
+| features            = math: + / &mdash; / x / FFT, vertical sensitivity: 2mV/div - 10V/div
 | website             = [http://www.rigolna.com/products/digital-oscilloscopes/ds1000e/ds1052e/ rigolna.com]
 }}