Difference between revisions of "Focussz Fosc21"
| Line 31: | Line 31: | ||
115200,8n1 | 115200,8n1 | ||
The | The protocol is currently being analyzed. This section will be updated with details at a later time. | ||
For more details see [[User_talk:Mrnuke#Focussz_Fosc21_Protocol]] | |||
== Resources == | == Resources == | ||
Revision as of 03:32, 28 January 2013
The Focussz Fosc21 is a USB-based, 2-channel oscilloscope with an analog bandwidth of 3kHz and a sampling rate of 8kHz (1 channel) / 4kHz (2 channels). The manufacturer improperly calls this device an oscilloscope: It can only measure voltages from 0-5V, and thus cannot measure negative voltages.
See Focussz Fosc21/Info for more details (such as lsusb -vvv output) about the device.
Hardware
- Main chip: ST STM8S103 (marking: "STM8S103-K3T6C 990XB F6 MYS 136")
- USB interface: Prolific PL-2303HX (marking: "PL-2303HX LE10193A")
- Crystals: 12.000 and 22.1184
Photos
Device and probes
Package contents
Device, top
Device, bottom
Device, connectors
Device, back
PCB, top
PCB, bottom
ST STM8S103-K3T6C
Prolific PL2303HX
Protocol
The USB connector is nothing more than a PL2303 USB serial adapter. The port settings are the following:
115200,8n1
The protocol is currently being analyzed. This section will be updated with details at a later time.
For more details see User_talk:Mrnuke#Focussz_Fosc21_Protocol