Difference between revisions of "MCU123 USBee AX Pro clone"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m |
Uwe Hermann (talk | contribs) m |
||
| Line 25: | Line 25: | ||
* '''Main chip''': Cypress CY7C68013A-56PVXC (FX2LP) | * '''Main chip''': Cypress CY7C68013A-56PVXC (FX2LP) | ||
* '''Input buffer''': NXP HC245 | * '''Input buffer''': NXP 74HC245 (markings: "NXP HC245 2A7K508 UnD2 18E") | ||
* '''256-byte I2C EEPROM''': Atmel AT24C02 (markings: "ATMEL218 24C02N SU27 D") | * '''256-byte I2C EEPROM''': Atmel AT24C02 (markings: "ATMEL218 24C02N SU27 D") | ||
* ''' | * '''3.3V low-dropout voltage regulator''': Advanced Monolithic Systems AMS1117-3.3 (markings: "AMS1117 3.3 HT240E") | ||
* '''24MHz crystal''': 24.000 | * '''24MHz crystal''': 24.000 | ||
Revision as of 20:56, 11 January 2013
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | ? |
| Memory | none |
| Compression | none |
| Website | dx.com |
The USBee AX Pro clone is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
It is a clone of the CWAV USBee AX-Pro, but it doesn't have analog (only 8-channel digital) sampling capabilities.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
See USBee AX Pro clone/Info for more detailed information on the device.
Hardware
- Main chip: Cypress CY7C68013A-56PVXC (FX2LP)
- Input buffer: NXP 74HC245 (markings: "NXP HC245 2A7K508 UnD2 18E")
- 256-byte I2C EEPROM: Atmel AT24C02 (markings: "ATMEL218 24C02N SU27 D")
- 3.3V low-dropout voltage regulator: Advanced Monolithic Systems AMS1117-3.3 (markings: "AMS1117 3.3 HT240E")
- 24MHz crystal: 24.000
Photos
Device, front
Device, angle
Device, back
Device, opened
PCB, front
PCB, back
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.