Difference between revisions of "Siglent SDG1010"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
[[File:Siglent sdg1010 device front 8116.jpg|thumb|right|Siglent SDG1010]] | [[File:Siglent sdg1010 device front 8116.jpg|thumb|right|Siglent SDG1010]] | ||
The [http://siglent.com/en/ | The [http://siglent.com/en/product/detail3.aspx?id=100000001526838&nodecode=119008003 Siglent SDG1010] is a 10MHz function generator with USB connectivity. | ||
See [[Siglent SDG1010/Info]] for more details (such as '''lsusb -vvv''' output) about the device. | See [[Siglent SDG1010/Info]] for more details (such as '''lsusb -vvv''' output) about the device. | ||
Revision as of 20:28, 15 August 2014
The Siglent SDG1010 is a 10MHz function generator with USB connectivity.
See Siglent SDG1010/Info for more details (such as lsusb -vvv output) about the device.
Hardware
Digital:
- ...: XILINX SPARTAN-6 XC6SLX9 (marking: "XILINX SPARTAN-6 XC6SLX9 FTG256BIV1201 D4339091A 2C TAIWAN")
- ...: ISP13628D (marking: "ISP13628D 78535 8W D78132F")
- ...: Lattice MachXO LCMXO640C (marking: "Lattice MachXO LCMXO640C 3TN144C A211CC25")
- ...: Analog Devices ADSP-BF531 (markings: "Analog Devices ADSP-BF531 SBSTZ400 2310414.1 0.6 #1208 Blackfin")
- ...: Advanced Monolithic Systems AMS1117 (marking: "AMS1117 1125")
- ...: Hynix H57V1262GTR (marking: "Hynix H57V1262GTR-75C 209S N8FT1265Q2")
- ...: Spansion S29GL064N90TFIO4 (markings: "Spansion S29GL064N90TFIO4 124FF491 H (C)06 SPANSION")
- and lots more...
Analog:
- 14 bit, 165Msps digital to analog converter: Burr-Brown DAC904E (marking: "BB DAC904E 03C9JNK"), (datasheet)
- Burr-Brown was acquired by Texas Instruments in 2000. New TI URLs: DAC904 product page, TI datasheet.
- 16 bit, high speed, low noise, voltage output, digital to analog converter : Texas Instruments DAC8580 (marking: "D8580I 09T A97S"), (datasheet)
- ...
Display/frontpanel:
- ...
Power supply:
- ...
Photos
Device
Teardown
Digital parts
Analog parts
Display / frontpanel
Power supply
Protocol
There are two possible PC connectivity methods that can be selected in the SDG1010 menu, which have different USB VID/PID pairs:
- "Raw USB" (this is what the vendor PC software uses): f4ed:ee37
- "USBTMC": f4ed:ee3a
Additionally, there are apparently GPIB and Ethernet options, but those are not available in the "standard" device. It's unclear if/where devices with those options can be bought, maybe only the rebranded LeCroy devices have them (?)
TODO: Details.
See the SDG1000 programming manual for a protocol description.