Difference between revisions of "Voltcraft VC-840"

From sigrok
Jump to navigation Jump to search
m
Line 53: Line 53:
The serial connection uses '''2400 baud''' (hardcoded, cannot be changed) with 8n1 settings. The multimeter transmits 14-byte data packets periodically, the host can '''not''' send any commands whatsoever, only read the transmitted data.
The serial connection uses '''2400 baud''' (hardcoded, cannot be changed) with 8n1 settings. The multimeter transmits 14-byte data packets periodically, the host can '''not''' send any commands whatsoever, only read the transmitted data.


A [http://www.produktinfo.conrad.com/datenblaetter/100000-124999/123295-da-01-en-RS232_Protocol_VOLTCRAFT_VC840_DMM.pdf short protocol description is available from Voltcraft/Conrad].
A [http://www.produktinfo.conrad.com/datenblaetter/100000-124999/123295-da-01-en-RS232_Protocol_VOLTCRAFT_VC840_DMM.pdf short protocol description is available from Voltcraft/Conrad]. And [http://www2.produktinfo.conrad.com/datenblaetter/100000-124999/121112-da-01-en-Digitalmultimeter_VC840_Schnittstellenp.pdf another one].


TODO: Optional USB cable.
TODO: Optional USB cable.

Revision as of 23:51, 7 July 2012

Voltcraft VC-840

The Voltcraft VC-840 is a 4000 counts, CAT IV (600V) handheld digital multimeter with RS232 or USB connectivity.

See Voltcraft VC-840/Info for more details (such as lsusb -vvv output) about the device.

Hardware

Multimeter:

RS232 cable:

  • TODO

USB cable:

  • TODO

Photos

Multimeter:

RS232 cable:

USB cable:

TODO.

Protocol

The connection to the PC is done using a cable which converts the optical signal (IR) on the multimeter to RS232.

The serial connection uses 2400 baud (hardcoded, cannot be changed) with 8n1 settings. The multimeter transmits 14-byte data packets periodically, the host can not send any commands whatsoever, only read the transmitted data.

A short protocol description is available from Voltcraft/Conrad. And another one.

TODO: Optional USB cable.

Resources

TODO.