Difference between revisions of "MASTECH MS2115B"
Jump to navigation
Jump to search
(Device photos added) |
Uwe Hermann (talk | contribs) (MASTECH MS2115B is supported.) |
||
| Line 2: | Line 2: | ||
| image = [[File:Ms2115b_front.jpg|80px]] | | image = [[File:Ms2115b_front.jpg|80px]] | ||
| name = MASTECH MS2115B | | name = MASTECH MS2115B | ||
| status = | | status = supported | ||
| source_code_dir = serial-dmm | | source_code_dir = serial-dmm | ||
| counts = 6000 | | counts = 6000 | ||
| Line 9: | Line 9: | ||
| measurements = voltage, current, resistance, capacitance, frequency, duty cycle, diode, continuity | | measurements = voltage, current, resistance, capacitance, frequency, duty cycle, diode, continuity | ||
| features = autorange, true-rms, data hold, min/max, relative, inrush, bargraph, backlight, ncv | | features = autorange, true-rms, data hold, min/max, relative, inrush, bargraph, backlight, ncv | ||
| website = | | website = [http://www.mastech-group.com/products.php?cate=95 mastech-group.com] | ||
}} | }} | ||
The '''MASTECH MS2115B''' is a 6000 counts, CAT III (1000V) / CAT IV (600V) handheld dual display digital clamp meter with USB connectivity. | The '''MASTECH MS2115B''' is a 6000 counts, CAT III (1000V) / CAT IV (600V) handheld dual display digital clamp meter with USB connectivity. | ||
See [[MASTECH MS2115B/Info]] for more details (such as '''lsusb -v''' output) about the device. | |||
== Hardware == | == Hardware == | ||
* CP2102 USB to UART bridge controller | |||
* ES51970 | * Silicon Labs CP2102 USB to UART bridge controller | ||
* Cyrustek ES51970 DMM analog front end with inrush ([http://www.cyrustek.com.tw/spec/ES51970.pdf datasheet]) | |||
== Photos == | == Photos == | ||
<gallery> | <gallery> | ||
File:Ms2115b_front.jpg|<small>Device, front</small> | File:Ms2115b_front.jpg|<small>Device, front</small> | ||
| Line 35: | Line 40: | ||
[[Category:Device]] | [[Category:Device]] | ||
[[Category:Multimeter]] | [[Category:Multimeter]] | ||
[[Category: | [[Category:Supported]] | ||
Revision as of 17:36, 1 May 2019
 | |
| Status | supported |
|---|---|
| Source code | serial-dmm |
| Counts | 6000 |
| IEC 61010-1 | CAT III (1000V) / CAT IV (600V) |
| Connectivity | USB/serial |
| Measurements | voltage, current, resistance, capacitance, frequency, duty cycle, diode, continuity |
| Features | autorange, true-rms, data hold, min/max, relative, inrush, bargraph, backlight, ncv |
| Website | mastech-group.com |
The MASTECH MS2115B is a 6000 counts, CAT III (1000V) / CAT IV (600V) handheld dual display digital clamp meter with USB connectivity.
See MASTECH MS2115B/Info for more details (such as lsusb -v output) about the device.
Hardware
- Silicon Labs CP2102 USB to UART bridge controller
- Cyrustek ES51970 DMM analog front end with inrush (datasheet)
Photos
Device, front
Device, back
USB interface
Protocol
The chip periodically sends 9-byte packets at 1200 baud, 8n1. There is no checksum or CRC in the packet.