Difference between revisions of "Protocol decoder:Ac97"
Jump to navigation
Jump to search
m (RS-232 is not AC'97) |
Uwe Hermann (talk | contribs) m (Uwe Hermann moved page Protocol decoder:AC97 to Protocol decoder:Ac97 without leaving a redirect: PD pages must match the all-lowercase PD directory name in srd (minus the first char, which is always capitalized in MediaWiki).) |
(No difference)
| |
Revision as of 16:15, 2 September 2017
| Name | AC'97 |
|---|---|
| Description | Data from AC'97 digital controller to AC'97 analog codec. |
| Status | In progress |
| License | GPLv2+ |
| Source code | decoders/ac97 |
| Input | logic |
| Output | ac97 |
| Probes | sync, clk, sdo, sdi |
| Optional probes | — |
| Options | — |
The ac97 protocol decoder can decode the AC'97 signal between the digital controller and the audio or modem codec (which contains the audio output / analog components of the architecture).
AC'97 defines a high-quality, 16- or 20-bit audio architecture with 5.1 surround sound support for the PC. AC'97 supports a 96 kHz sampling rate at 20-bit stereo resolution and a 48 kHz sampling rate at 20-bit stereo resolution for multichannel recording and playback.
Status
Bits are annotated with the correct bit number. Slots are correctly annotated.
See https://github.com/mithro/libsigrokdecode/tree/master/decoders/ac97
Hardware
FIXME
Protocol
FIXME