Difference between revisions of "Tektronix TDS2000B series"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) |
|||
| Line 16: | Line 16: | ||
The '''Tektronix TDS2000B series''' are 2-4 channel oscilloscopes with 1-2GSa/s sampling rate, analog bandwidth of 60-200MHz and USB connectivity (optionally GPIB via the TEK-USB-488 adapter). | The '''Tektronix TDS2000B series''' are 2-4 channel oscilloscopes with 1-2GSa/s sampling rate, analog bandwidth of 60-200MHz and USB connectivity (optionally GPIB via the TEK-USB-488 adapter). | ||
See [[Tektronix TDS2000B series/Info]] for more details (such as '''lsusb -v''' output) about the device. | |||
== Devices == | == Devices == | ||
Revision as of 09:45, 21 January 2015
 | |
| Status | planned |
|---|---|
| Channels | 2-4 (depending on model) |
| Samplerate | 1-2GS/s (depending on model) |
| Samplerate (eq. time) | ? |
| Analog bandwidth | 200MHz (depending on model) |
| Vertical resolution | 8bits |
| Triggers | edge, composite video, alternate |
| Connectivity | USB host/device, GPIB |
| Features | tek.com |
The Tektronix TDS2000B series are 2-4 channel oscilloscopes with 1-2GSa/s sampling rate, analog bandwidth of 60-200MHz and USB connectivity (optionally GPIB via the TEK-USB-488 adapter).
See Tektronix TDS2000B series/Info for more details (such as lsusb -v output) about the device.
Devices
| Model | Samplerate | Bandwidth | Channels |
|---|---|---|---|
| TDS2002B | 1GSa/s | 60MHz | 2 |
| TDS2004B | 1GSa/s | 60MHz | 4 |
| TDS2012B | 1GSa/s | 100MHz | 2 |
| TDS2014B | 1GSa/s | 100MHz | 4 |
| TDS2022B | 2GSa/s | 200MHz | 2 |
| TDS2024B | 2GSa/s | 200MHz | 4 |
Protocol
The device uses USBTMC and a SCPI command set documented by the vendor.
Resources
- User manual: TDS1000B and TDS2000B series (login required)
- Programmer manual: TDS200, TDS1000/TDS2000, TDS1000B/TDS2000B, and TPS2000 series digital oscilloscopes (10/2006) (login required)
- Programmer manual: TBS1000B, TBS1000, TDS200, TDS1000/2000, TDS1000B/2000B, TDS1000C-EDU/TDS2000C, TPS2000/TPS2000B series (07/2014) (login required)
- GPIB command set changed