Difference between revisions of "USBTMC"
Jump to navigation
Jump to search
(Updated broken link. Seems like the USB.org people pulled the file.) |
Uwe Hermann (talk | contribs) (Link to latest USBTMC spec from usb.org.) |
||
| Line 5: | Line 5: | ||
* '''USB488 subclass specification''': this specifies how to send and receive IEEE-488.1 and IEEE-488.2 commands over a USBTMC-based transport. | * '''USB488 subclass specification''': this specifies how to send and receive IEEE-488.1 and IEEE-488.2 commands over a USBTMC-based transport. | ||
The standard is freely available [http:// | The standard is freely available from [http://www.usb.org/developers/docs/devclass_docs/USBTMC_1_006a.zip usb.org]. | ||
The sigrok project aims to support this standard through the [http://www.librevisa.org librevisa] library. | The sigrok project aims to support this standard through the [http://www.librevisa.org librevisa] library. | ||
Revision as of 19:43, 17 January 2015
USBTMC (USB Test and Measurement Class) is a set of standard device class specifications, built on top of the USB standard. It is intended as a modern replacement of the venerable IEEE-488 (GPIB) standard, which is based on a large parallel connector. Two standards documents are specified:
- USBTMC specification: specifies the protocol and descriptors that allow communications between devices and client software.
- USB488 subclass specification: this specifies how to send and receive IEEE-488.1 and IEEE-488.2 commands over a USBTMC-based transport.
The standard is freely available from usb.org.
The sigrok project aims to support this standard through the librevisa library.