Difference between revisions of "LabNation SmartScope"

From sigrok
Jump to navigation Jump to search
Line 28: Line 28:
* '''250MHz, rail-to-rail I/O, CMOS dual opamp''': [http://www.ti.com/product/opa2354 Texas Instruments OPA2354] ([http://www.ti.com/lit/gpn/opa2354 datasheet])
* '''250MHz, rail-to-rail I/O, CMOS dual opamp''': [http://www.ti.com/product/opa2354 Texas Instruments OPA2354] ([http://www.ti.com/lit/gpn/opa2354 datasheet])
* '''Quad buffer/line driver with 5V tolerant input/outputs, 3-state''': 74LVC126A
* '''Quad buffer/line driver with 5V tolerant input/outputs, 3-state''': 74LVC126A
* 0480000 OCP1332 1725
* 4x CGA4V
* S03A


== Photos ==
== Photos ==

Revision as of 12:29, 4 December 2014

LabNation SmartScope
Lab nation smartscope mugshot.png
Status planned
Channels 8
Samplerate 100MHz
Samplerate (state)
Triggers low, high, rising, falling, edge
Min/max voltage ?
Threshold voltage Fixed: VIL=0.8V, VIH=2.0V
Memory 4Msamples (8MByte SDRAM)
Compression ?
Website lab-nation.com

The LabNation SmartScope is a USB-based mixed-signal oscilloscope (100 MS/s, 45MHz bandwidth), 8-channel logic analyzer (100MHz), arbitrary waveform generator / function generator.

See LabNation SmartScope/Info for some more details (such as lsusb -v output) on the device.

Hardware

Photos

Protocol

Resources