Difference between revisions of "Protocol decoder:Rgb led spi"

From sigrok
Jump to navigation Jump to search
(Created page with "{{Infobox protocol decoder | id = rgb_led_spi | name = RGB LED (SPI) | description = Generic RGB LED string protocol (RGB values clocked over SPI) ...")
 
m
 
(2 intermediate revisions by 2 users not shown)
Line 3: Line 3:
| name            = RGB LED (SPI)
| name            = RGB LED (SPI)
| description    = Generic RGB LED string protocol (RGB values clocked over SPI)
| description    = Generic RGB LED string protocol (RGB values clocked over SPI)
| status          = <span style="background-color: lime">supported</span>
| status          = supported
| license        = GPLv2+
| license        = GPLv2+
| source_code_dir = rgb_led_spi
| source_code_dir = rgb_led_spi
| image          = [[File:Pd rgb led spi example.png|250px]]
| image          = [[File:Pd rgb led spi example.png|250px]]
| input          = spi
| input          = [[Protocol decoder:spi|spi]]
| output          = rgb_led_spi
| output          = rgb_led_spi
| probes          = &mdash;
| probes          = &mdash;
| optional_probes = &mdash;
| optional_probes = &mdash;
| options        = &mdash;
}}
}}


Line 52: Line 53:


[[Category:Protocol decoder]]
[[Category:Protocol decoder]]
[[Category:SPI]]

Latest revision as of 23:59, 2 April 2015

rgb_led_spi
Pd rgb led spi example.png
Name RGB LED (SPI)
Description Generic RGB LED string protocol (RGB values clocked over SPI)
Status supported
License GPLv2+
Source code decoders/rgb_led_spi
Input spi
Output rgb_led_spi
Probes —
Optional probes —
Options —

The rgb_led_spi protocol decoder supports various LED controllers that get RGB color data via SPI in 24bit chunks (3x 8bit SPI words).

Hardware

WorldSemi WS2801 based led string

The led/ws2801 directory in sigrok-dumps contains a set of example captures of the data for a WorldSemi WS2801 based LED string.

The logic analyzer used was a Saleae Logic16 (at 5MHz).

Probe setup:

Probe WS2801
1 (black) UNI1
2 (brown) CLK

Protocol

The protocol is SPI-based and expects 24bit RGB values, i.e. 3 SPI words of 8bits each.

Since only one direction is needed in some cases, it is sufficient to have the CLK and (e.g.) MOSI SPI line available.

Resources

Retrieved from "https://sigrok.org/w/index.php?title=Protocol_decoder:Rgb_led_spi&oldid=10723"