Difference between revisions of "Robomotic MiniLogic"
Jump to navigation
Jump to search
Uwe Hermann (talk | contribs) m (→Hardware) |
Uwe Hermann (talk | contribs) m |
||
| (9 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
[[File:Robomotic minilogic. | {{Infobox logic analyzer | ||
| image = [[File:Robomotic minilogic.png|180px]] | |||
| name = Robomotic MiniLogic | |||
| status = supported | |||
| source_code_dir = fx2lafw | |||
| channels = 8 | |||
| samplerate = 24MHz | |||
| samplerate_state = — | |||
| triggers = none (SW-only) | |||
| voltages = -0.5V — 5.25V | |||
| threshold = Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V | |||
| memory = none | |||
| compression = none | |||
| website = [http://buglogic.robomotic.com robomotic.com] | |||
}} | |||
The | The '''Robomotic MiniLogic''' is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate. | ||
See [[Robomotic MiniLogic/Info]] for more | It is a clone of the [[Saleae Logic]]. | ||
In sigrok, we use the open-source [[fx2lafw]] firmware for this logic analyzer. | |||
See [[Robomotic MiniLogic/Info]] for more details (such as '''lsusb -vvv''' output) about the device. | |||
== Hardware == | == Hardware == | ||
* Main chip: Cypress CY7C68013A-56PVXC ( | * '''Main chip:''' [http://www.cypress.com/?rID=38801 Cypress CY7C68013A-56PVXC (FX2LP)] ([http://www.cypress.com/?docID=34060 datasheet]) | ||
* Octal 3- | * '''Octal 3-state non-inverting buffer/line-driver/line-receiver:''' 74HC244A (TODO: vendor?) | ||
* 1A | * '''1A low-dropout voltage regulator (3.3V):''' [http://www.advanced-monolithic.com/products/voltreg.html#1117 Advanced Monolithic Systems AMS1117-3.3] ([http://www.advanced-monolithic.com/pdf/ds1117.pdf datasheet]) | ||
* 2K I2C serial EEPROM: 2x Microchip 24LC02BI | * '''2K I2C serial EEPROM:''' 2x [https://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010810 Microchip 24LC02BI] ([http://ww1.microchip.com/downloads/en/DeviceDoc/21709J.pdf datasheet]) | ||
* 64K I2C serial EEPROM: Microchip 24LC64I | * '''64K I2C serial EEPROM:''' [https://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010831 Microchip 24LC64I] ([http://ww1.microchip.com/downloads/en/DeviceDoc/21189S.pdf datasheet]) | ||
== | == Photos == | ||
<gallery> | <gallery> | ||
| Line 23: | Line 41: | ||
File:Robomotic minilogic 74hc244a.jpg|<small>74HC244A</small> | File:Robomotic minilogic 74hc244a.jpg|<small>74HC244A</small> | ||
File:Robomotic minilogic ams1117.jpg|<small>AMS1117</small> | File:Robomotic minilogic ams1117.jpg|<small>AMS1117</small> | ||
File:Robomotic minilogic microchip 24lc02bi.jpg|<small>Microchip 24LC02BI</small> | File:Robomotic minilogic microchip 24lc02bi.jpg|<small>2x Microchip 24LC02BI</small> | ||
File:Robomotic minilogic microchip 24lc64i.jpg|<small>Microchip 24LC64I</small> | File:Robomotic minilogic microchip 24lc64i.jpg|<small>Microchip 24LC64I</small> | ||
</gallery> | </gallery> | ||
See also [https://secure.flickr.com/photos/uwehermann/sets/72157629563753680/ this flickr set] for more photos of the device. | |||
== Protocol == | |||
Since we use the open-source [[fx2lafw]] firmware for this device, we don't need to know the protocol. | |||
== Resources == | |||
TODO. | |||
[[Category:Device]] | |||
[[Category:Logic analyzer]] | |||
[[Category:Supported]] | |||
Latest revision as of 12:19, 28 July 2013
 | |
| Status | supported |
|---|---|
| Source code | fx2lafw |
| Channels | 8 |
| Samplerate | 24MHz |
| Samplerate (state) | — |
| Triggers | none (SW-only) |
| Min/max voltage | -0.5V — 5.25V |
| Threshold voltage | Fixed: VIH=2.0V—5.25V, VIL=-0.5V—0.8V |
| Memory | none |
| Compression | none |
| Website | robomotic.com |
The Robomotic MiniLogic is a USB-based, 8-channel logic analyzer with up to 24MHz sampling rate.
It is a clone of the Saleae Logic.
In sigrok, we use the open-source fx2lafw firmware for this logic analyzer.
See Robomotic MiniLogic/Info for more details (such as lsusb -vvv output) about the device.
Hardware
- Main chip: Cypress CY7C68013A-56PVXC (FX2LP) (datasheet)
- Octal 3-state non-inverting buffer/line-driver/line-receiver: 74HC244A (TODO: vendor?)
- 1A low-dropout voltage regulator (3.3V): Advanced Monolithic Systems AMS1117-3.3 (datasheet)
- 2K I2C serial EEPROM: 2x Microchip 24LC02BI (datasheet)
- 64K I2C serial EEPROM: Microchip 24LC64I (datasheet)
Photos
Device, front
Device, back
PCB, front
PCB, back
Cypress FX2
74HC244A
AMS1117
2x Microchip 24LC02BI
Microchip 24LC64I
See also this flickr set for more photos of the device.
Protocol
Since we use the open-source fx2lafw firmware for this device, we don't need to know the protocol.
Resources
TODO.