Difference between revisions of "Voltcraft VC-890/Info"
Jump to navigation
Jump to search
(Created page with "== lsusb == This is the lsusb ouput on Linux: <small> $ '''lsusb -vvv''' Bus 010 Device 002: ID 10c4:ea80 Cygnal Integrated Products, Inc. CP210x UART Bridge Device Desc...") |
Uwe Hermann (talk | contribs) |
||
| (2 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
== lsusb == | == lsusb == | ||
<small> | <small> | ||
$ '''lsusb - | $ '''lsusb -v''' | ||
Bus 010 Device 002: ID 10c4:ea80 Cygnal Integrated Products, Inc. CP210x UART Bridge | Bus 010 Device 002: ID '''10c4:ea80 Cygnal Integrated Products, Inc. CP210x UART Bridge''' | ||
Device Descriptor: | Device Descriptor: | ||
bLength 18 | bLength 18 | ||
| Line 14: | Line 12: | ||
bDeviceProtocol 0 | bDeviceProtocol 0 | ||
bMaxPacketSize0 64 | bMaxPacketSize0 64 | ||
idVendor 0x10c4 Cygnal Integrated Products, Inc. | idVendor 0x10c4 '''Cygnal Integrated Products, Inc.''' | ||
idProduct 0xea80 CP210x UART Bridge | idProduct 0xea80 '''CP210x UART Bridge''' | ||
bcdDevice 1.00 | bcdDevice 1.00 | ||
iManufacturer 1 | iManufacturer 1 '''Silicon Laboratories''' | ||
iProduct 2 | iProduct 2 '''CP2110 HID USB-to-UART Bridge''' | ||
iSerial 3 | iSerial 3 '''VS_c004_00002792''' | ||
bNumConfigurations 1 | bNumConfigurations 1 | ||
Configuration Descriptor: | Configuration Descriptor: | ||
| Line 37: | Line 35: | ||
bAlternateSetting 0 | bAlternateSetting 0 | ||
bNumEndpoints 2 | bNumEndpoints 2 | ||
bInterfaceClass 3 Human Interface Device | bInterfaceClass 3 '''Human Interface Device''' | ||
bInterfaceSubClass 0 No Subclass | bInterfaceSubClass 0 '''No Subclass''' | ||
bInterfaceProtocol 0 None | bInterfaceProtocol 0 '''None''' | ||
iInterface 0 | iInterface 0 | ||
HID Device Descriptor: | HID Device Descriptor: | ||
| Line 50: | Line 48: | ||
wDescriptorLength 919 | wDescriptorLength 919 | ||
Report Descriptors: | Report Descriptors: | ||
** UNAVAILABLE ** | '''** UNAVAILABLE **''' | ||
Endpoint Descriptor: | Endpoint Descriptor: | ||
bLength 7 | bLength 7 | ||
| Line 71: | Line 69: | ||
wMaxPacketSize 0x0040 1x 64 bytes | wMaxPacketSize 0x0040 1x 64 bytes | ||
bInterval 1 | bInterval 1 | ||
Device Status: 0x0000 | |||
(Bus Powered) | |||
</small> | </small> | ||
Latest revision as of 13:32, 7 October 2017
lsusb
$ lsusb -v
Bus 010 Device 002: ID 10c4:ea80 Cygnal Integrated Products, Inc. CP210x UART Bridge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x10c4 Cygnal Integrated Products, Inc.
idProduct 0xea80 CP210x UART Bridge
bcdDevice 1.00
iManufacturer 1 Silicon Laboratories
iProduct 2 CP2110 HID USB-to-UART Bridge
iSerial 3 VS_c004_00002792
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 919
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)